Cisco - WS-C2960X-48FPD-L - Catalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+, LAN Base

  • 10108115-003
Order number: 10108115-003
on request

Delivery time 4 Workdays

Order number: 10108115-014
on request

Delivery time 3 Workdays

Please inform me as soon as the product is available again.

  • 3 year warranty
  • Same day shipments via UPS
  • personal account manager
  • technical support and configurations

Product Description

Catalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+, LAN Base
more

Product information

Dimensions & Weight
Depth: 36.8 cm
Height: 4.5 cm
Weight: 5.8 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Humidity Range Storage: 10 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -25 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x Stacking Module
Interfaces: 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 24 ports (PoE+) / 48 ports (PoE) - 30 W ¦ 1 x console console - RJ-45 - RJ-45 ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 2 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 2 x SFP+ - SFP+ uplink
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: Virtual interfaces (VLANs): 1023
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Device Type: Switch - 48 ports - Managed - stackable
Enclosure Type: Desktop, rack-mountable 1U
Features: Layer 2 switching, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Cisco FlexStack Plus
Flash Memory: 128 MB
Jumbo Frame Support: 9216 bytes
Max Units In A Stack: 8
Performance: Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 130.9 Mpps
PoE Budget: 740 W
Ports: 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE): PoE+
Processor: : 600 MHz
RAM: 512 MB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Status Indicators: Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386
MTBF: 233,370 hours
Power
Features: Redundant Power System (RPS) connector
Power Device: Internal power supply
Power Redundancy: Optional
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS LAN Base
Cisco -  C9300-48U-E -  Cisco - C9300-48U-E -
From 1,004.80$ *
Viewed