Cisco - CISCO888-SEC-K9 - Cisco888 G.SHDSL Sec Router w/ ISDN B/U w/ Adv IP Services

  • 10106092-014
Order number: 10106092-003
on request

Delivery time 3 Workdays

Order number: 10106092-014
104.24$
Prices incl. VAT plus shipping costs
net price:87.60$
available: 6

Ready,
Delivery time 1-4 workdays

Do you have any questions concerning this product?
  • 3 year warranty
  • Same day shipments via UPS
  • personal account manager
  • technical support and configurations

Product Description

Cisco888 G.SHDSL Sec Router w/ ISDN B/U w/ Adv IP Services
more
Communications
Protocols & Specifications: ITU G.991.2 (G.shdsl)
Type: DSL modem
Dimensions & Weight
Depth: 24.9 cm
Height: 4.4 cm
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces: LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45
General
Authentication Method: RADIUS, TACACS+
Capacity: IPSec VPN tunnels: 20
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology: Wired
Data Link Protocol: Ethernet, Fast Ethernet
Device Type: Router - 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features: NAT support, interrupt status port (ISP), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, MAC address filtering, IPv6 support, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
Flash Memory: 128 MB
Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA
RAM: 256 MB (installed) / 768 MB (max) DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE
Status Indicators: Port status, power
Power
Power Device: External power adapter - 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Viewed