Cisco - CISCO892FW-E-K9 - 892F - Router - WLAN 1.000 Mbps - 8-Port - Kabellos

  • 10126492-014
Order number: 10126492-003
on request

Delivery time approx. 5 working days

Order number: 10126492-014
on request

Delivery time 3 Workdays

Please inform me as soon as the product is available again.

  • 3 year warranty
  • Same day shipments via UPS
  • personal account manager
  • technical support and configurations

Product Description

892F - Router - WLAN 1.000 Mbps - 8-Port - Kabellos
more
Aerial
Antenna Qty: 3
Directivity: Omni-directional
Communications
Type: ISDN terminal adapter
Dimensions & Weight
Depth: 26.4 cm
Height: 4.4 cm
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces: LAN: 8 x 10Base-T/100Base-TX - RJ-45 ¦ 1 x console - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ Management: 1 x auxiliary - RJ-45 ¦ USB 2.0: 2 x 4 pin USB Type A ¦ WAN: 1 x BRI ST ¦ WAN: 1 x SFP (mini-GBIC)
General
Authentication Method: RADIUS, TACACS+
Capacity: IPSec VPN tunnels: 50
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type: Wireless router - 8-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: LEAP, Triple DES, AES, PEAP, TKIP, WPA, WPA2
Features: Firewall protection, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, Intrusion Prevention System (IPS), Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Multiple SSID support, DNS proxy
Flash Memory: 256 MB (installed) / 256 MB (max)
Frequency Band: 2.4 GHz / 5 GHz
Network / Transport Protocol: L2TP, IPSec
RAM: 512 MB (installed) / 1 GB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR)
Status Indicators: Port status, power
Power
Power Device: External power adapter - 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Viewed