Är du intresserad av servicekontrakt eller billiga leasingerbjudanden? Vi hjälper dig gärna!

HPE - JH378A - HPE FlexFabric 5930 2-slot 2QSFP+ Front-to-Back AC Bundle

HPE - JH378A - HPE FlexFabric 5930 2-slot 2QSFP+ Front-to-Back AC Bundle
  • 10193171-003
Artikel nr.: 10193171-003
på förfrågan

Leveranstid 3 Arbetsdagar

Artikel nr.: 10193171-014
på förfrågan

Leveranstid ca 5 dagar

Informera mig så snart artikeln är tillgänglig.

  • 3 års garanti
  • Frakt samma dag via UPS
  • Personal Account Manager
  • Teknisk support och konfigurationer

Produktbeskrivning



Herstellerinformationen:
Hewlett-Packard GmbH
Herrenberger Straße 140
71034 Böblingen Deutschland
+49 69 153253561
+49 7031 9858500
enterprise.kunden@hpe.com
https://www.hpe.com/de/de/about/impressum.html
Dimensions & Weight
Depth: 66 cm
Height: 4.42 cm
Weight: 18 kg
Width: 44 cm
Environmental Parameters
Humidity Range Operating: 10 - 90% (non-condensing)
Max Operating Temperature: 45 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 2 (total) / 2 (free) x Expansion Slot
Installed Modules Qty (Max): 0 (installed) / 2 (max)
Interfaces: 2 x 40Gbit LAN QSFP+ ¦ 1 x serial (console) RJ-45 ¦ 1 x management RJ-45 ¦ 1 x USB 2.0 Type A
General
Authentication Method: Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
Capacity: Virtual interfaces (VLANs): 4096 ¦ IPv4 routing table entries: 120000 ¦ IPv6 routing table entries: 60000
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1aq, IEEE 802.3ag
Device Type: Switch - 2 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Features: Flow control, DHCP support, ARP support, port mirroring, Weighted Round Robin (WRR) queuing, SNTP support, Weighted Fair Queuing (WFQ), sFlow, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), Data Center Bridging (DCB), Transparent (N_Port ID Virtualization - NPIV) mode support, Registered State Change Notification (RSCN) support, Name Server-based zoning, Strict Priority (SP), Edge Virtual Bridging (EVB), Intelligent Resilient Framework Technology (IRF), redundant fans, reverse airflow support, 12.2MB packet buffer, Precision Time Protocol (PTP), FCoE support, RDMA over Converged Ethernet (RoCE), Virtual Ethernet Port Aggregator (VEPA), In-Service Software Upgrade (ISSU), FCoE Initialization Protocol (FIP), Deficit Round Robin (DRR), VXLAN tunnel endpoints (VTEP) support
Flash Memory: 1 GB
Jumbo Frame Support: 10000 bytes
MAC Address Table Size: 288K entries
Performance: Latency (64-byte packets): 1 µs ¦ Throughput: up to 1071 Mpps ¦ Routing/switching capacity: 1.44 Tbps
Ports: 2 x 40 Gigabit QSFP+
RAM: 4 GB SDRAM
Remote Management Protocol: SNMP 1, Telnet, SNMP 3, SNMP 2c, SSH
Routing Protocol: OSPF, RIP, BGP-4, IS-IS, RIP-2, BGP, IGMP, VRRP, OSPFv3, static IPv6 routing, RIPng, MPLS, Bidirectional Forwarding Detection (BFD)
Subtype: 40 Gigabit Ethernet
Miscellaneous
Compliant Standards: ETSI, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, EN 60825-1, ANSI C63.4-2003, EN 60825-2, EN 61000-3-2:2006, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, AS/NZS CISPR 22, EMC 2004/108/EC, EN 300 386 V1.3.3, CAN/CSA-C22.2 No. 60950-1, EN 55024:1998+A1:2001+A2:2003
Included Accessories: HP X711 front (port side) to back (power side) airflow high volume fan tray
MTBF: 47.2 years
Power
Installed Qty: 2 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Provided: 650 Watt
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V (50/60 Hz)
Senast betraktad