Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - WS-C4506E-S7L+96V+ - Catalyst 4506-E - Switch - 1.000 Mbps - Rack-Modul

  • 10125686-003
Numer artykułu: 10125686-003
zapytaj o dostępność

Czas realizacji zamówienia Ok. 5 dni roboczych

Numer artykułu: 10125686-014
zapytaj o dostępność

Czas realizacji zamówienia Ok. 5 dni roboczych

Proszę o poinformowanie mnie gdy produkt będzie ponownie dostępny.

  • 3 lata gwarancji
  • Dostawa następnego dnia za pośrednictwem UPS
  • Osobisty Specjalista ds. kluczowych klientów
  • Wsparcie techniczne i konfiguracja

Opis produktu

Catalyst 4506-E - Switch - 1.000 Mbps - Rack-Modul

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html
Dimensions & Weight
Depth: 31.7 cm
Height: 44.1 cm
Width: 44 cm
Environmental Parameters
Humidity Range Operating: 10 - 90% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 75 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Expansion Slots: 6 (total) / 3 (free) x Expansion Slot ¦ 1 (total) / 0 (free) x SD Memory Card
Installed Modules Qty (Max): 3 (installed) / 6 (max)
Interfaces: 96 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE ¦ 1 x console - RJ-45 management ¦ 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 management ¦ 1 x USB Type A ¦ 2 x SFP (mini-GBIC)
General
Capacity: QoS hardware entries: 64000 ¦ Security services entries: 64000 ¦ Virtual interfaces (VLANs): 4094 ¦ IPv4 routes: 64000 ¦ IPv6 routes: 32000 ¦ Spanning Tree Protocol instances: 12000 ¦ Switched virtual interfaces (SVIs): 4094 ¦ NetFlow entries: 128000
Compliant Standards: IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3at
Device Type: Switch - 96 ports - Managed - with Cisco Catalyst 4500 Supervisor Engine 7L-E, 2x Cisco Line Cards (WS-X4648-RJ45V+E)
Enclosure Type: Rack-mountable 10U
Features: Flow control, modular design, Layer 2 switching, power over Ethernet (PoE), IPv6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, PoE+, IPv4 support, Link Aggregation Control Protocol (LACP), NetFlow
Flash Memory: 1 GB
Jumbo Frame Support: 9216 bytes
MAC Address Table Size: 55K entries
Performance: Switching capacity: 520 Gbps ¦ Per-slot switching capacity: 48 Gbps ¦ IPv6 routing: 110 Mbps ¦ IPv4 routing: 225 Mbps
Ports: 96 x 10/100/1000 (PoE) + 2 x Gigabit SFP
Power Over Ethernet (PoE): PoE+
Processor: 1: 1.5 GHz
RAM: 2 GB SDRAM
Remote Management Protocol: RMON 1, RMON 2
Routing Protocol: RIP, static IP routing
Status Indicators: Port status, power, link OK, status of modules, link/activity
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: NEBS level 3, FCC Class A certified, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 Class A, CS-03, FCC CFR47 Part 15, EN300-386
Rack Mounting Kit: Included
Power
Power Device: Internal power supply - hot-plug
Power Redundancy: Yes
Software / System Requirements
Software Included: Cisco IOS LAN Base
Wyświetlony