Cisco - ATA191-3PW-K9 - 2-PORT ANALOG TELEPHONE ADAPTER FOR MULTIPLATFORM

Cisco - ATA191-3PW-K9 - 2-PORT ANALOG TELEPHONE ADAPTER FOR MULTIPLATFORM

Productnr.: 10237404-003

Verwittig mij wanneer het product leverbaar is.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Menu sluiten

Produktbeschreibung

2-PORT ANALOG TELEPHONE ADAPTER FOR MULTIPLATFORM

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Compatibility Information
Designed For:	Cisco ATA 191

Environmental Parameters
Humidity Range Operating:	10 - 90% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	2 x FXS - RJ-11 ¦ 2 x 100Base-TX - RJ-45

General
Depth:	2.8 cm
Device Type:	VoIP phone adapter
Height:	10 cm
Weight:	132.1 g
Width:	10 cm

IP Telephony
IP Telephony Features:	Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), Caller ID, call waiting, automatic fax/modem detection and pass-through, distinctive ringing, call transfer, silence suppression, dynamic jitter buffer, Do-not-disturb (DND) support, call pickup, redial
Telephony Interfaces:	2 phone (FXS)
VoIP Protocols:	SIP, RTCP, RTP, SRTP
Voice Codecs:	G.711, T.38

Miscellaneous
Compliant Standards:	ETSI, FCC Part 15 B, EN 61000-4-2:2009, EN 61000-4-11:2004, EN 61000-3-3:2013, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-8:2010, EN 61000-4-5:2014, EN 55024:2010+A1:2015, EN 61000-4.4:2012, UL 60950 Second Edition, CAN/CSA C22.2 No. 60950 Second Edition, ICES-003 issue 6, ANSI C63.4-2014, EN 61000-3-2:2014 Class A, AN/NZS 60950.1:2015, EN 55032:2015 Class B, AS/NZS CISPR32:2015 Class B, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, VCCI-CISPR 32:2016, CISPR 32:2015 Class B
MTBF:	300,000 hours

Miscellaneous

Compliant Standards:

ETSI, FCC Part 15 B, EN 61000-4-2:2009, EN 61000-4-11:2004, EN 61000-3-3:2013, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-8:2010, EN 61000-4-5:2014, EN 55024:2010+A1:2015, EN 61000-4.4:2012, UL 60950 Second Edition, CAN/CSA C22.2 No. 60950 Second Edition, ICES-003 issue 6, ANSI C63.4-2014, EN 61000-3-2:2014 Class A, AN/NZS 60950.1:2015, EN 55032:2015 Class B, AS/NZS CISPR32:2015 Class B, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, VCCI-CISPR 32:2016, CISPR 32:2015 Class B

MTBF:

300,000 hours

Networking
Compliant Standards:	IEEE 802.1Q, IEEE 802.1p, G.729a, G.729ab, G.726, G.711 (µ-law), G.711 (A-law)
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Encryption Algorithm:	TLS 1.1, TLS 1.2
Features:	NAT support, Syslog support, DiffServ support, SNTP support, Quality of Service (QoS), reset button, LLDP support, Type of Service (ToS), dual image support, AES encryption, Cisco Discovery Protocol, Zero-touch provisioning (ZTP), secure boot, VLAN Tagging, Caller ID generation, abbreviated dialing (speed dial), fax over VoIP
Form Factor:	Wall mountable
Network / Transport Protocol:	TCP/IP, UDP/IP, PPPoE, ARP, DHCP, RTP, HTTP, HTTPs
Remote Management Protocol:	SNMP 3, TFTP, SSH, TR-069, ICMP, IPv4, IPv6
Status Indicators:	Power, phone