HP - JG899A - Switch HP JG899A FlexFabric 5700-32XGT-8XG-2QSFP+ - Switch - 10.000 Mbps new and refurbished buy online low prices

HPE - JG899A - Switch HP JG899A FlexFabric 5700-32XGT-8XG-2QSFP+ - Switch - 10.000 Mbps

Productnr.: 10140068-014

Verwittig mij wanneer het product leverbaar is.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Produktbeschreibung

Switch HP JG899A FlexFabric 5700-32XGT-8XG-2QSFP+ - Switch - 10.000 Mbps

Herstellerinformationen:
Hewlett-Packard GmbH
Herrenberger Straße 140
71034 Böblingen Deutschland
+49 69 153253561
+49 7031 9858500
enterprise.kunden@hpe.com
https://www.hpe.com/de/de/about/impressum.html

Dimensions & Weight
Depth:	46 cm
Height:	4.37 cm
Width:	43.99 cm

Environmental Parameters
Humidity Range Operating:	10 - 90% (non-condensing)
Max Operating Temperature:	45 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	32 x 10GBase-T RJ-45 ¦ 8 x Gigabit / 10Gbit LAN SFP+ ¦ 2 x 40Gbit LAN QSFP+ uplink ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB 2.0 management ¦ 1 x RJ-45 management

General
Authentication Method:	Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
Capacity:	IPv4 routing table entries: 128 ¦ IPv6 routing table entries: 128 ¦ Virtual interfaces (VLANs): 4094
Compliant Standards:	IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.3ag
Device Type:	Switch - 40 ports - L3 - Managed
Enclosure Type:	Rack-mountable 1U
Features:	Flow control, DHCP support, ARP support, IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, SNTP support, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, Data Center Bridging Exchange (DCBX) support, priority-based flow control, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), LLDP support, Data Center Bridging (DCB), Management Information Base (MIB), NTP time synchronisation, Class of Service (CoS), Strict Priority (SP), Intelligent Resilient Framework Technology (IRF), FCoE support
Flash Memory:	512 MB
Jumbo Frame Support:	10000 bytes
MAC Address Table Size:	128K entries
Performance:	Throughput: 714.2 Mpps ¦ Routing/switching capacity: 960 Gbps
Ports:	32 x 10GBase-T + 8 x 10 Gigabit Ethernet SFP+ / 1 Gigabit Ethernet SFP+ + 2 x 40 Gigabit QSFP+ (uplink)
RAM:	2 GB SDRAM
Remote Management Protocol:	SNMP 1, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI
Routing Protocol:	RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, static IPv4 routing, static IPv6 routing
Subtype:	10 Gigabit Ethernet

Miscellaneous
Compliant Standards:	GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, EN 60825-1, ANSI C63.4, EN 60825-2, VCCI Class A, AS/NZS CISPR 22, EN 300 386 V1.3.3, CAN/CSA-C22.2 No. 60950-1
TAA Compliant:	Yes

Miscellaneous

Compliant Standards:

GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, NOM, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, EN 60825-1, ANSI C63.4, EN 60825-2, VCCI Class A, AS/NZS CISPR 22, EN 300 386 V1.3.3, CAN/CSA-C22.2 No. 60950-1

TAA Compliant:

Yes

Power
Installed Qty:	2 (max)
Power Consumption Operational:	350 Watt
Power Device:	Internal power supply - hot-plug
Power Redundancy:	Optional
Power Redundancy Scheme:	1+1 (with optional power supply)
Voltage Required:	AC 120/230 V / DC -48 -60 V (50/60 Hz)