Cisco - N3K-C3064TQ-32T - Nexus 3064-T, 32 x 10GBase-T and 4 QSFP+ ports new and refurbished buy online low prices

Voorvertoning: Cisco - N3K-C3064TQ-32T - Nexus 3064-T, 32 x 10GBase-T and 4 QSFP+ ports

Cisco - N3K-C3064TQ-32T - Nexus 3064-T, 32 x 10GBase-T and 4 QSFP+ ports

Productnr.: 10109569-003

Verwittig mij wanneer het product leverbaar is.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Menu sluiten

Produktbeschreibung

Nexus 3064-T, 32 x 10GBase-T and 4 QSFP+ ports

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Product information

Dimensions & Weight
Depth:	57 cm
Height:	4.4 cm
Weight:	9.5 kg
Width:	43.9 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Humidity Range Storage:	5 - 95% (non-condensing)
Max Operating Temperature:	40 °C
Max Storage Temperature:	70 °C
Min Operating Temperature:	0 °C
Min Storage Temperature:	-40 °C

Expansion / Connectivity
Interfaces:	48 x 10Gbit LAN RJ-45 ¦ 4 x 40Gbit WAN QSFP+ ¦ 2 x management (Gigabit LAN) RJ-45 ¦ 1 x serial (console) RJ-45 ¦ 1 x USB Type A

General
Authentication Method:	RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2)
Capacity:	Virtual interfaces (VLANs): 4096 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ Rapid Spanning Tree Protocol instances: 512 ¦ OSPF routes: 256 ¦ ACL entries: 2000 ¦ QoS hardware queues: 8
Compliant Standards:	IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3ba
Device Type:	Switch - 32 ports - L3 - Managed
Enclosure Type:	Rack-mountable 1U
Encryption Algorithm:	AES
Features:	DHCP support, trunking, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), EIGRP Stub Routing, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Class of Service (CoS), Multicast Source Discovery Protocol (MSDP)
Flash Memory:	2 GB
Jumbo Frame Support:	9216 bytes
MAC Address Table Size:	128K entries
Performance:	Switching capacity: 1.28 Tbps ¦ Forwarding performance: 950 Mpps
Ports:	32 x 10GBase-T + 4 x 40 Gigabit QSFP+
Remote Management Protocol:	SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, SSH-2, CLI
Routing Protocol:	RIP-2, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, static IP routing, IGMPv3, PIM-SSM, MSDP
Subtype:	10 Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, RoHS, GB 4943, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300386

Power
Installed Qty:	0 (installed) / 2 (max)
Power Device:	Internal power supply - hot-plug
Power Redundancy:	Optional

Software / System Requirements
Software Included:	Cisco NX-OS Layer 3 Base Services