Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - WS-C3850-48XS-E - Catalyst 3850-48XS-E - Switch - L3

  • 10127434-014
Productnr.: 10127434-003
auf Anfrage

Leveringstijd 3 Werkdagen

Productnr.: 10127434-014
auf Anfrage

Leveringstijd ca. 5 dagen

Verwittig mij wanneer het product leverbaar is.

  • 3 Jahre Garantie
  • schneller Versand
  • persönlicher Kundenberater
  • Konfiguration Ihrer Hardware

Produktbeschreibung

Catalyst 3850-48XS-E - Switch - L3
meer

Product information

Dimensions & Weight
Depth: 51.1 cm
Height: 4.45 cm
Weight: 7.45 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Interfaces: 48 x 10GBase-X SFP+ ¦ 4 x 10GBase-X QSFP+ uplink ¦ 1 x USB Type A ¦ 1 x management (mini-USB) Type B ¦ 1 x console RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 2 x network stack device
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: IPv4 routes: 24000 ¦ NetFlow entries: 96000 ¦ Virtual interfaces (VLANs): 4000 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards: IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type: Switch - 48 ports - L3 - Managed - stackable
Enclosure Type: Front to back airflow desktop, rack-mountable 1U
Features: DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP)
Flash Memory: 8 GB
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 32000 entries
Performance: Switching capacity: 1280 Gbps ¦ Stacking bandwidth: 480 Gbps
Ports: 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x QSFP+
RAM: 8 GB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Routing Protocol: OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, IGMP, PIM-SM, PIM-DM, IGMPv3, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MLDv2, MLD
Status Indicators: Port transmission speed, port duplex mode, power, system, active, status
Subtype: 10 Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1
MTBF: 286,900 hours
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply
Power Provided: 750 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Voltage Required: AC 120/230 V (50 - 60 Hz)
Software / System Requirements
Software Included: Cisco IOS IP Services
Laatst bekeken