Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp
- Productnr.: 10106273-014
- 3 Jahre Garantie
- schneller Versand
- persönlicher Kundenberater
- Konfiguration Ihrer Hardware
Produktbeschreibung
Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp
Communications | |
---|---|
Digital Signaling Protocol: | ADSL2, ADSL2+, VDSL2 |
Protocols & Specifications: | ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A |
Type: | DSL modem |
Dimensions & Weight | |
---|---|
Depth: | 26.4 cm |
Height: | 4.4 cm |
Weight: | 2.5 kg |
Width: | 32.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 - 85% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
Interfaces: | LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2 |
General | |
---|---|
Authentication Method: | RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST |
Capacity: | IPSec VPN tunnels: 20 |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet |
Device Type: | Router - 4-port switch (integrated) |
Enclosure Type: | Desktop |
Encryption Algorithm: | LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
Features: | Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
Flash Memory: | 128 MB |
Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
RAM: | 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin |
Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
Status Indicators: | Port status, power |
Line Properties | |
---|---|
Framing Format: | ANSI T1.413 |
Power | |
---|---|
Power Device: | External power adapter - 60 Watt |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
OS Provided: | Cisco IOS Advanced Security |
Laatst bekeken