Cisco - C9500-32QC-E - Catalyst 9500 32-port 40/100G only, Essential

Numero Ordine: 10237788-003

Informatemi non appena il prodotto è nuovamente disponibile.

3 anni di garanzia
Spedizioni in giornata con UPS
Account Manager personale
Assistenza tecnica e configurazioni

Descrizione del prodotto

Catalyst 9500 32-port 40/100G only, Essential

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Dimensions & Weight
Depth:	45.7 cm
Height:	4.39 cm
Weight:	9.91 kg
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	5 - 90% (non-condensing)
Humidity Range Storage:	5 - 95% (non-condensing)
Max Operating Temperature:	40 °C
Max Storage Temperature:	65 °C
Min Operating Temperature:	0 °C
Min Storage Temperature:	-20 °C

Expansion / Connectivity
Interfaces:	32 x 100Gbit/40Gbit LAN QSFP ¦ 2 x USB 3.0

General
Built-in Devices:	RFID tag
Capacity:	Routing table entries: 80000 ¦ Indirect IPv4 routes: 212000 ¦ Host IPv4 routes: 90000 ¦ Indirect IPv6 routes: 212000 ¦ Host IPv6 routes: 90000 ¦ Multicast scale: 32000 ¦ QoS ACL scale: 16000 ¦ Security ACL scale: 270000 ¦ FNF entries: 96000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba
Device Type:	Switch - 32 ports - L3 - Managed - stackable
Enclosure Type:	Rack-mountable 1U
Encryption Algorithm:	256-bit AES
Features:	DHCP support, NAT support, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Quality of Service (QoS), MLD snooping, Non-Stop Routing (NSR), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), 802.1x authentication, integrated Wireshark, Ethernet over MPLS (EoMPLS), Private VLAN, Zero-touch provisioning (ZTP), CoAP support, secure boot, Switched Port Analyzer (SPAN), First Hop Security (FHS)
Flash Memory:	16 GB
Jumbo Frame Support:	9198 bytes
MAC Address Table Size:	64K entries
Performance:	Switching capacity (full duplex): 3.2 Tbps ¦ Forwarding rate: 1 Bpps
Ports:	32 x 40 Gigabit QSFP
Processor:	1: 2.4 GHz
RAM:	16 GB
Remote Management Protocol:	SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, NETCONF, RESTCONF
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, IGMP, VRRP, MSDP, policy-based routing (PBR), RIPng
Status Indicators:	Status
Subtype:	40 Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1
MTBF:	307,200 hours

Power
Installed Qty:	1 (installed) / 2 (max)
Power Device:	Internal power supply - hot-plug
Power Provided:	650 Watt
Power Redundancy:	Optional
Power Redundancy Scheme:	1+1
Voltage Required:	AC 120/230 V (50 - 60 Hz)

Software / System Requirements
Software Included:	Cisco IOS XE 16.8.1