Cisco - WS-X45-SUP6-E - Catalyst 4500 E-Series Sup 6-E, 2x10GE(X2) w/ Twin Gig

  • 10103680-014
Numero Ordine: 10103680-003
Su richiesta

Tempi di consegna circa 5 giorni lavorativi

Numero Ordine: 10103680-014
114,50 €
Prezzi incl. IVA più costi di spedizione
Prezzo netto:96,22 €
Disponibile: 2

Pronto per la spedizione di oggi,
tempo di consegna ca. 1-4 giorni lavorativi

Avete domande relative a questo prodotto?
  • 3 anni di garanzia
  • Spedizioni in giornata con UPS
  • Account Manager personale
  • Assistenza tecnica e configurazioni

Descrizione del prodotto

Cisco - WS-X45-SUP6-E - Catalyst 4500 E-Series Sup 6-E, 2x10GE(X2) w/ Twin Gig

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html
Communications
Supported Flash Memory Cards: CompactFlash Card
Compatibility Information
Designed For: Cisco Catalyst 4503-E, 4506-E, 4507R-E, 4510R-E
Environmental Parameters
Humidity Range Operating: 10 - 90%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Compatible Slots: 1 x Expansion Slot
Expansion Slots: 2 (total) / 2 (free) x X2
Interfaces: 1 x management - RJ-45 ¦ 1 x 1000Base-T (management) - RJ-45 ¦ 1 x USB - Type A ¦ 1 x USB - Type B
General
Device Type: Control processor
Installed Modules Qty (Max): 0 (2)
Miscellaneous
Compliant Standards: FCC Class A certified, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, ICES-003 Class A, FCC CFR47 Part 15
Networking
Authentication Method: Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Capacity: QoS hardware entries: 64000 ¦ Security services entries: 64000 ¦ Hardware forwarding entries: 256000 ¦ Multicast entries (IPv4): 128000 ¦ Multicast entries (IPv6): 64000 ¦ MAC addresses: 55000 ¦ Virtual interfaces (VLANs): 4096 ¦ IPv6 routes: 128000 ¦ IPv4 routes: 256000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
Connectivity Technology: Wired
Data Link Protocol: 10 Gigabit Ethernet
Features: Auto-negotiation, VLAN support, IGMP snooping, Syslog support, IPv6 support, High Availability, Spanning Tree Protocol (STP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping
Form Factor: Plug-in module
Network / Transport Protocol: NTP, ICMP/IP
Performance: Switching capacity: 320 Gbps ¦ IPv4 routing: 250 Mbps ¦ IPv6 routing: 125 Mbps
Ports Qty: 2
Remote Management Protocol: SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, TFTP, SMON, SSH, SSH-2, CLI
Routing Protocol: OSPF, RIP, BGP-4, RIP-2, BGP, EIGRP, HSRP, IGMP, DVMRP, VRRP, PIM-SM, static IP routing, EIGRP for IPv6, GRE, OSPFv3, PIM-SSM, Multiprotocol BGP, MSDP, static IPv4 routing, static IPv6 routing, RIPng, MLDv2, MLD
Status Indicators: Bandwidth utilization %, link OK, status, link/activity
Switching Protocol: Ethernet
Processor / Memory / Storage
Processors Installed: 1 x 1.3 GHz
RAM: 512 MB (1 GB max) SDRAM
Software / System Requirements
OS Required: Cisco IOS 12.2(40)SG
Visto