Découvrez maintenant nos offres de maintenance et de location!

HPE - JH390A - FlexFabric 5940 48SFP+ 6QSFP28 - Switch - L3

  • 10138809-014
Réf. d'article : 10138809-003
Sur demande

Délai de livraison 3 Jours ouvrés

Réf. d'article : 10138809-014
Sur demande

Délai de livraison 3 Jours ouvrés

Avertissez-moi lorsque l'article sera de nouveau disponible.

  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Hewlett Packard Enterprise FlexFabric 5940 48SFP+ 6QSFP28. Type de commutateur: Géré, Banc de commutateurs: L2/L4. Type de port Ethernet RJ-45 de commutation de base: None, Quantité de Ports USB 2.0: 1, Port de console: RJ-45/Mini-USB. Répertoire MAC: 288000 entrées, Capacité de commutation: 2160 Gbit/s. Standards réseau: IEEE 802.1s,IEEE 802.1w,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3ah,IEEE 802.3x. Grille de montage, Format: 1U

Herstellerinformationen:
Hewlett-Packard GmbH
Herrenberger Straße 140
71034 Böblingen Deutschland
+49 69 153253561
+49 7031 9858500
enterprise.kunden@hpe.com
https://www.hpe.com/de/de/about/impressum.html

Informations sur le produit

Dimensions & Weight
Depth: 46 cm
Height: 4.36 cm
Weight: 11 kg
Width: 44 cm
Environmental Parameters
Humidity Range Operating: 10 - 90% (non-condensing)
Max Operating Temperature: 45 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: 48 x Gigabit / 10Gbit LAN SFP+ ¦ 6 x 100Gbit LAN QSFP28 ¦ 1 x serial (console) RJ-45 ¦ 1 x management (LAN) RJ-45 ¦ 1 x USB 2.0
General
Authentication Method: Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Capacity: IPv4 routing table entries: 120000 ¦ IPv6 routing table entries: 60000
Compliant Standards: IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1AX, IEEE 802.1Qaz, IEEE 802.3ag
Device Type: Switch - 48 ports - L3 - Managed - stackable
Enclosure Type: Rack-mountable 1U
Features: Flow control, DHCP support, port mirroring, IPv6 support, Weighted Fair Queuing (WFQ), Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), LLDP support, DHCP protection, Registered State Change Notification (RSCN) support, Strict Priority (SP), Edge Virtual Bridging (EVB), Intelligent Resilient Framework Technology (IRF), reverse airflow support, SNMP support, cut-through, FCoE support, In-Service Software Upgrade (ISSU), IP source guard, VXLAN tunnel endpoints (VTEP) support
Flash Memory: 1 GB
Jumbo Frame Support: Yes
MAC Address Table Size: 288K entries
Max Units In A Stack: 9
Performance: Routing/switching capacity: 2160 Gbps ¦ Latency (10 Gbps):
Ports: 48 x 1 Gigabit / 10 Gigabit SFP+ + 6 x 100 Gigabit QSFP28
RAM: 4 GB SDRAM
Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, SSH-2, CLI
Routing Protocol: OSPF, BGP-4, IS-IS, RIP-1, RIP-2, IGMP, VRRP, OSPFv2, OSPFv3, static IPv6 routing, RIPng, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD)
Subtype: 100 Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, GOST, NOM, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, ANATEL, UL-AR, EN 60825-1, ANSI C63.4-2003, EN 60825-2, VCCI Class A, EN 61000-3-3:1995+A1:2001+A2:2005, EMC 2004/108/EC, EN 55022 Class A, FCC CFR47 Part 15 A, EN 60950-1/A11, FDA 21 CFR, EN 1000-3-2:2006, CAN/CSA-C22.2 No. 60950-1
Pricing Type: Remarketed
Power
Power Device: Internal power supply
HPE -  JG898A -  FlexFabric 5700-32XGT-8XG-2QSFP+ - Switch - 10.000 Mbps - 42-Port 1 HE - USB 2.0 HPE - JG898A - FlexFabric...
À partir de 719,50 € *
Derniers articles consultés