Découvrez maintenant nos offres de maintenance et de location!

HPE - JL581A - HPE Aruba 8320 - Switch - L3 - verwaltet - 48 x 1 Gigabit / 10 Gigabit Ethernet +

  • 10230623-014
Réf. d'article : 10230623-003
Sur demande

Délai de livraison 3 Jours ouvrés

Réf. d'article : 10230623-014
Sur demande

Délai de livraison 3 Jours ouvrés

Avertissez-moi lorsque l'article sera de nouveau disponible.

  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Aruba 8320 48 T/6 40 X472 5 2 Bdl - Switch - Fiber Optic

Herstellerinformationen:
Hewlett-Packard GmbH
Herrenberger Straße 140
71034 Böblingen Deutschland
+49 69 153253561
+49 7031 9858500
enterprise.kunden@hpe.com
https://www.hpe.com/de/de/about/impressum.html

Informations sur le produit

Dimensions & Weight
Depth: 44.3 cm
Height: 4.39 cm
Weight: 9.5 kg
Width: 47.3 cm
Environmental Parameters
Humidity Range Operating: 5 - 95% (non-condensing)
Humidity Range Storage: 5 - 95% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Interfaces: 48 x 1/10Gbit LAN ¦ 1 x serial RJ-45 ¦ 1 x console (micro-USB) ¦ 1 x RJ-45 ¦ 6 x 40Gbit LAN QSFP+
General
Authentication Method: RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Capacity: Virtual interfaces (VLANs) per port for 802.1q: 4096
Compliant Standards: IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1t, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX
Device Type: Switch - 48 ports - L3 - Managed - with X472 5 Fans 2 Power Supply
Enclosure Type: Rack-mountable 1U
Encryption Algorithm: FIPS 140-2
Features: VPN support, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Link Aggregation Control Protocol (LACP), redundant hot swappable fans, packet storm protection, Strict Priority (SP), Loopback, Bridge protocol data unit (BPDU), Multi-Chassis Link Aggregation (MLAG), Protocol Independent Multicast (PIM)
Flash Memory: 8 MB
Jumbo Frame Support: 9KB
MAC Address Table Size: 14K entries
Performance: Switching capacity: 2.5 Tbps ¦ Forwarding performance: 1.905 Mpps
Ports: 48 x 1 Gigabit / 10 Gigabit Ethernet + 6 x 40 Gigabit QSFP+
Processor: 1: 2 GHz
RAM: 16 GB
Remote Management Protocol: SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, CLI, SFTP
Routing Protocol: OSPF, IGMPv2, IGMP, VRRP, IGMPv3, GRE, static IPv6 routing, ECMP
Subtype: 10 Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 24, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-8, EN 61000-3-3, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, RoHS, UL 60950-1, WEEE, AS/NZS, EN 50581:2012, CNS 13438, CSA 22.2 No. 60950-1, EN 55024:2010, EN 60825-1:2007, FCC CFR47 Part 15 A, ICES-003 issue 5, Directive 2014/35/EU, EN 55032:2015, IEC 60825-1:2007 Class 1, CISPR 32:2015 Class A, CISPR 32 Class A, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
MTBF: 275,339 hours
Rack Mounting Kit: Included
TAA Compliant: Yes
Power
Installed Qty: 2 (installed) / 2 (max)
Power Consumption Operational: 348 Watt
Power Device: Internal power supply - hot-plug
Power Provided: 400 Watt
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V (50/65 Hz)
HPE -  JG898A -  FlexFabric 5700-32XGT-8XG-2QSFP+ - Switch - 10.000 Mbps - 42-Port 1 HE - USB 2.0 HPE - JG898A - FlexFabric...
À partir de 719,50 € *
Derniers articles consultés