Découvrez maintenant nos offres de maintenance et de location!

HPE - JG542A - 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots - Switch - Kupferdraht 1.000

  • 10128944-014
Réf. d'article : 10128944-003
Sur demande

Délai de livraison 3 Jours ouvrés

Réf. d'article : 10128944-014
Sur demande

Délai de livraison 4 Jours ouvrés

Avertissez-moi lorsque l'article sera de nouveau disponible.

  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Switch with 2 Interface Slots
plus
Dimensions & Weight
Depth: 46 cm
Height: 4.37 cm
Weight: 10.5 kg
Width: 43.99 cm
Environmental Parameters
Humidity Range Operating: 5 - 95% (non-condensing)
Humidity Range Storage: 5 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Expansion Slots: 2 (total) / 2 (free) x Expansion Slot
Installed Modules Qty (Max): 0 (installed) / 2 (max)
Interfaces: 48 x 1000Base-T RJ-45 PoE+ ¦ 4 x Ethernet 1000 - SFP (mini-GBIC) - SFP ¦ 2 x 10Gb Ethernet - SFP+ - SFP+ ¦ 1 x console RJ-45 management ¦ 1 x RJ-45 - RJ-45 management
General
Authentication Method: Secure Shell (SSH), RADIUS, Secure Shell v.2 (SSH2), HWTACACS
Capacity: IPv4 routing table entries: 12000 ¦ IPv6 routing table entries: 6000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.3at
Device Type: Switch - 48 ports - Managed - stackable
Enclosure Type: Rack-mountable 1U
Features: Layer 2 switching, DHCP support, ARP support, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), MLD snooping, Device Link Detection Protocol (DLDP) support, Rapid Ring Protection Protocol (RRPP) support, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Endpoint Admission Defense (EAD), STP Root Guard, Unicast Reverse Path Forwarding (URPF), IPv4 support, LLDP support, dual firmware images, port isolation, packet storm protection, Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF), Multicast Source Discovery Protocol (MSDP), Multicast Border Gateway Protocol (MBGP)
Flash Memory: 512 MB
Jumbo Frame Support: Yes
MAC Address Table Size: 32K entries
Performance: Routing/switching capacity: 224 Gbps ¦ Throughput: up to 166.6 Mpps
PoE Budget: 1440 W
Ports: 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE): PoE+
RAM: 1 GB SDRAM
Remote Management Protocol: SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, SSH-2, CLI
Routing Protocol: OSPF, RIP, IS-IS, BGP, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, ECMP, RIPng, MLDv2, MLD, IS-ISv6, BGP-4+, MPLS, Bidirectional Forwarding Detection (BFD)
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: FCC Class A certified, ETSI, CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, EN 60825-2, VCCI V-3 Class A ITE, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1
Rack Mounting Kit: Included
Power
Installed Qty: 0 (installed) / 2 (max)
Power Device: Internal power supply
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Derniers articles consultés