Cisco - DS-C9148S-D12PSK9 - MDS 9148S - Switch - Rack-Modul new and refurbished buy online low prices

Réf. d'article : 10125248-003

Avertissez-moi lorsque l'article sera de nouveau disponible.

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Description du produit

Cisco DS-C9148S-D12PSK9. Type de commutateur: GÃ©rÃ©. Type de port Ethernet RJ-45 de commutation de base: Gigabit Ethernet (10/100/1000), QuantitÃ© de ports Ethernet RJ-45 de commutation de base: 1, Nombre de modules SFP+ installÃ©s: 12, QuantitÃ© de Ports USB 2.0: 1, Port de console: RS-232. CapacitÃ© de commutation: 16 Gbit/s. Grille de montage, Format: 1U

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Dimensions & Weight
Depth:	41.5 cm
Height:	4.37 cm
Weight:	9 kg
Width:	43.59 cm

Environmental Parameters
Humidity Range Operating:	10 - 90% (non-condensing)
Humidity Range Storage:	10 - 95% (non-condensing)
Max Operating Temperature:	40 °C
Max Storage Temperature:	70 °C
Min Operating Temperature:	0 °C
Min Storage Temperature:	-40 °C

Expansion / Connectivity
Interfaces:	1 x 1000Base-T RJ-45 management ¦ 1 x serial (RS-232) RJ-45 management ¦ 1 x USB Type A ¦ 12 x 16Gb Fibre Channel LC multi-mode x 2 ¦ 36 x 16Gb Fibre Channel SFP+ Ports on Demand

General
Authentication Method:	RADIUS, TACACS+, Secure Shell v.2 (SSH2), LDAP, Active Directory
Device Type:	Switch - 48 ports - Managed
Enclosure Type:	Back to front airflow rack-mountable 1U
Encryption Algorithm:	AES
Features:	Auto-sensing per device, ISL support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), role based access control, Registered State Change Notification (RSCN) support, SFTP client
Fibre Channel:	FC-DA, FC-FLA, FC-FS, FC-GS-3, FC-GS-4, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-5, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-LS, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5, FC-BB-4, FC-IFR, FAIS, FAIS-2, FC-PI-5, FC-LS-2, FC-SP-2, FC-SB-4, FC-DA-2, FC-MI-3, FC-MSQS, FC-BB-6
Ports:	12 x 16Gb Fibre Channel
Remote Management Protocol:	RMON, SNMP 3, HTTP, SMI-S, SSH-2, CLI
Subtype:	Fibre Channel

Miscellaneous
Compliant Standards:	CISPR 22 Class A, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, EN 61000-6-1, ACA TS001, AS/NZS 3260, EMC, ICES-003 Class A, FIPS 140-2, FCC CFR21 Part 1040, EN 60825, IEC 60825, CAN/CSA C22.2 No. 60950, EN 55022 Class A

Power
Installed Qty:	2 (installed) / 2 (max)
Power Device:	Internal power supply - hot-plug
Power Provided:	300 Watt
Power Redundancy:	Yes
Power Redundancy Scheme:	1+1
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
Software Included:	Cisco Data Center Network Manager (DCNM) for SAN Advanced Edition, Cisco MDS 9000 Family Enterprise Package