Découvrez maintenant nos offres de maintenance et de location!

Cisco - WS-C3850-24UW-S - Catalyst 3850-24U-S - Switch - L3

  • 10126136-014
Réf. d'article : 10126136-003
Sur demande

Délai de livraison env. 5 jours

Réf. d'article : 10126136-014
4655,50 €
Prix dont TVA plus frais de port
Prix ​​net:3912,18 €
Disponible: 1

Prêt à expédier immédiatement,
délai de livraison env. 1-4 jours ouvrés

Questions sur l'article ?
  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Cisco Catalyst WS-C3850-24UW-S. Type de commutateur: Géré. Quantité de ports Ethernet RJ-45 de commutation de base: 24. Répertoire MAC: 32000 entrées. Standards réseau: IEEE 802.11ac,IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE.... Grille de montage

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Informations sur le produit

Dimensions & Weight
Depth: 45 cm
Height: 4.45 cm
Weight: 7.4 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x Expansion Slot
Interfaces: 24 x 1000Base-T RJ-45 UPOE - 30 W ¦ 1 x USB Type A ¦ 1 x management (mini-USB) Type B ¦ 1 x serial (RS-232) RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 2 x network stack device
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: IPv4 routes: 24000 ¦ NetFlow entries: 24000 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at
Device Type: Switch - 24 ports - L3 - Managed - stackable - with 5 x Cisco Access Point Adder License (LIC-CTIOS-1A)
Enclosure Type: Desktop, rack-mountable 1U
Features: Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, universal power over Ethernet (UPOE), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)
Flash Memory: 2 GB
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 32000 entries
Performance: Switching capacity: 88 Gbps ¦ Stacking bandwidth: 480 Gbps
PoE Budget: 435 W
Ports: 24 x 10/100/1000 (UPOE)
Power Over Ethernet (PoE): UPOE
RAM: 4 GB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng
Status Indicators: Port transmission speed, port duplex mode, system, status, PoE
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, EN 55022 Class A
MTBF: 269,450 hours
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply
Power Provided: 715 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS IP Base
Derniers articles consultés