Cisco - WS-C3560X-48U-S - Catalyst 3560X 48 Port UPoE IP Base - Switch - 1.000 Mbps new and refurbished buy online low prices

Aperçu: Cisco - WS-C3560X-48U-S - Catalyst 3560X 48 Port UPoE IP Base - Switch - 1.000 Mbps

Cisco - WS-C3560X-48U-S - Catalyst 3560X 48 Port UPoE IP Base - Switch - 1.000 Mbps

Réf. d'article : 10128514-014

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Catalyst 3560X - GÃ©rÃ© - L2 - Gigabit Ethernet (10/100/1000) - Connexion Ethernet - supportant l'alimentation via ce port (PoE) - Grille de montage - 1U

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Informations sur le produit

Dimensions & Weight
Depth:	49.5 cm
Height:	4.45 cm
Weight:	7.6 kg
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	5 - 95% (non-condensing)
Max Storage Temperature:	70 °C
Min Operating Temperature:	-5 °C
Min Storage Temperature:	-40 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x Expansion Slot
Interfaces:	48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 UPOE - 60 W ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX - RJ-45 management

General
Authentication Method:	Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:	Virtual interfaces (VLANs): 1005 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at
Device Type:	Switch - 48 ports - Managed
Enclosure Type:	Desktop, rack-mountable 1U
Features:	Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)
Flash Memory:	128 MB
Jumbo Frame Support:	9216 bytes
Performance:	Switching fabric bandwidth: 160 Gbps ¦ Forwarding performance: 101.2 Mpps
PoE Budget:	800 W
Ports:	48 x 10/100/1000 (UPOE)
Power Over Ethernet (PoE):	UPOE
RAM:	256 MB
Remote Management Protocol:	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, static IP routing, RIPng
Status Indicators:	Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype:	Gigabit Ethernet

Miscellaneous
Compliant Standards:	TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1
MTBF:	189,710 hours
Rack Mounting Kit:	Optional

Power
Features:	Redundant Power System (RPS) connector
Installed Qty:	1 (installed) / 2 (max)
Power Device:	Internal power supply
Power Provided:	1100 Watt
Power Redundancy:	Optional
Power Redundancy Scheme:	1+1 (with optional power supply)
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
Software Included:	Cisco IOS IP Base