Découvrez maintenant nos offres de maintenance et de location!

Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

  • 10112338-014
Réf. d'article : 10112338-003
Sur demande

Délai de livraison env. 5 jours

Réf. d'article : 10112338-014
156,50 €
Prix dont TVA plus frais de port
Prix ​​net:131,51 €
Disponible: 1

Prêt à expédier immédiatement,
délai de livraison env. 1-4 jours ouvrés

Questions sur l'article ?
  • 3 ans de garantie
  • Envoi jour même via UPS
  • Gestionnaire de compte dédié
  • Support technique et configuration

Description du produit

Cisco 886, Wi-Fi 4 (802.11n), Wi-Fi 4 (802.11n), IEEE 802.1Q,IEEE 802.1x, 128-bit AES,192-bit AES,WPA,256-bit AES,WPA-PSK,WPA2, IGMPv3, EIGRP

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html
Aerial
Aerial: External detachable
Antenna Qty: 3
Directivity: Omni-directional
Gain Level: 2 dBi
Communications
Digital Signaling Protocol: ADSL over ISDN, ADSL2+ over ISDN
Protocols & Specifications: ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex B
Type: ISDN / DSL modem combo
Dimensions & Weight
Depth: 26.4 cm
Height: 4.4 cm
Weight: 2.5 kg
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 85% (non-condensing)
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST
General
Authentication Method: RADIUS, TACACS+
Capacity: IPSec VPN tunnels: 20
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.1ag, IEEE 802.11n (draft 2.0), CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type: Wireless router - 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features: NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Flash Memory: 128 MB
Frequency Band: 2.4 GHz
Network / Transport Protocol: L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM: 256 MB (installed) / 768 MB (max)
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP
Status Indicators: Port status, power
Power
Power Device: External power adapter - 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced Security
Derniers articles consultés