Cisco - C887VAGW+7-E-K9 - VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS ETS WLAN neu und gebraucht günstig online kaufen

Aperçu: Cisco - C887VAGW+7-E-K9 - VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS ETS WLAN

Cisco - C887VAGW+7-E-K9 - VDSL2/ADSL2+ over POTS and 3G HSPA+ R7 with SMS/GPS ETS WLAN

Réf. d'article : 10109464-003

Avertissez-moi lorsque l'article sera de nouveau disponible.

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Cisco 887. Bande Wi-Fi: Bi-bande (2,4 GHz / 5 GHz), Norme Wi-Fi: Wi-Fi 4 (802.11n), DÃ©bit de transfert des donnÃ©es WLAN (max): 300 Mbit/s. Type d'interface LAN Ethernet: Fast Ethernet, Standards rÃ©seau: IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3,IEEE 802.3u, LAN Ethernet : taux de transfert des donnÃ©es: 10,100 Mbit/s. Normes 2G: EDGE,GPRS, Normes 3G: HSPA,HSPA+,UMTS, Bandes GSM supportÃ©es: 850,900,1800,1900 MHz. Protocoles de gestion: SNMP. Couleur du produit: Noir

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Aerial
Aerial:	External detachable
Antenna Qty:	3
Directivity:	Omni-directional
Gain Level:	2 dBi

Communications
Cellular Protocol:	GPRS, UMTS, EDGE, HSPA, HSPA+
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.993.2
Type:	DSL modem / wireless cellular modem

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:	Wireless, wired
Data Link Protocol:	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:	Wireless router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Flash Memory:	256 MB
Frequency Band:	2.4 GHz / 5 GHz
Network / Transport Protocol:	L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:	512 MB (installed) / 512 MB (max) DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR)
Status Indicators:	Port status, power

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security