Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp new and refurbished buy online low prices

Pour profiter de toutes les fonctionnalités de Tonitrus.com - Votre boutique en ligne informatique pour les produits informatiques neufs et d'occasion, nous vous conseillons d'activer Javascript dans votre navigateur.

Découvrez maintenant nos offres de maintenance et de location!

Aperçu: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Aperçu: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Aperçu: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Aperçu: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Réf. d'article : 10106273-014

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Description du produit

887VA - Wi-Fi 4 (802.11n) - 802.11b,802.11g,Wi-Fi 4 (802.11n) - Fast Ethernet - IEEE 802.11b,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE... 10,100 Mbit/s - 10/100Base-T(X)

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
Type:	DSL modem

Dimensions & Weight
Depth:	26.4 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

General
Authentication Method:	RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Device Type:	Router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:	128 MB
Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators:	Port status, power

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security

Derniers articles consultés