Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant new and refurbished buy online low prices

Aperçu: Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Réf. d'article : 10106272-003

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Cisco 887VA. Norme Wi-Fi: Wi-Fi 4 (802.11n), DÃ©bit de transfert des donnÃ©es WLAN (max): 150 Mbit/s, Standards wifi: 802.11b,802.11g,Wi-Fi 4 (802.11n). Type d'interface LAN Ethernet: Fast Ethernet, Standards rÃ©seau: IEEE 802.11b,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1D,IEEE 802.1Q,IEEE 802.3,IEEE..., LAN Ethernet : taux de transfert des donnÃ©es: 10,100 Mbit/s. SpÃ©cifications de DSL: G.993.2, G.992.1, G.992.3, G.992.5, G.994.1, G.922.3. Algorithme de sÃ©curitÃ© soutenu: 128-bit AES,256-bit AES,3DES,802.1x.... Protocole de routage: EIGRP,HSRP, Protocoles de gestion: SNMPv3, IGMPv3, Protocoles rÃ©seau pris en charge: IPv4, IPv6, DNS, PPPoE, PPPoA, HTTPS, FTP, Telnet

plus

Aerial
Aerial:	External detachable
Antenna Qty:	3
Directivity:	Omni-directional
Gain Level:	2 dBi

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M
Type:	DSL modem

Dimensions & Weight
Depth:	26.4 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

General
Authentication Method:	RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wireless, wired
Data Link Protocol:	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:	Wireless router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:	128 MB
Frequency Band:	2.4 GHz
Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators:	Port status, power

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security