Cisco - CISCO887G-K9 - 887G ADSL2/2+ AnnexA Sec Router w/ Ad.IP,3G Global GSM/HSPA new and refurbished buy online low prices

Aperçu: Cisco - CISCO887G-K9 - 887G ADSL2/2+ AnnexA Sec Router w/ Ad.IP,3G Global GSM/HSPA

Cisco - CISCO887G-K9 - 887G ADSL2/2+ AnnexA Sec Router w/ Ad.IP,3G Global GSM/HSPA

Réf. d'article : 10104485-003

Avertissez-moi lorsque l'article sera de nouveau disponible.

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

AnnexA Sec Router w/ Ad.IP,3G Global GSM/HSPA, configurable with a choice of 3G modems

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+
Protocols & Specifications:	ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.992.5 Annex A
Type:	DSL modem / wireless cellular modem

Dimensions & Weight
Depth:	24.9 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Device Type:	Router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Flash Memory:	128 MB
Network / Transport Protocol:	L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:	256 MB (installed) / 768 MB (max)
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE
Status Indicators:	Port status, power

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security