Cisco - AIR-AP3802I-E-K9 - 802.11ac W2 AP w/CA; 4x43; Mod; Int Ant; mGig E Domain new and refurbished buy online low prices

Aperçu: Cisco - AIR-AP3802I-E-K9 - 802.11ac W2 AP w/CA; 4x43; Mod; Int Ant; mGig E Domain

Cisco - AIR-AP3802I-E-K9 - 802.11ac W2 AP w/CA; 4x43; Mod; Int Ant; mGig E Domain

Réf. d'article : 10116471-003

Questions sur l'article ?

3 ans de garantie
Envoi jour même via UPS
Gestionnaire de compte dédié
Support technique et configuration

Fermer menu

Description du produit

Cisco AIR-AP3802I-E-K9. DÃ©bit de transfert des donnÃ©es maximum: 5200 Mbit/s, Taux maximum de transfert des donnÃ©es via le rÃ©seau local sans fil: 2600 Mbit/s, LAN Ethernet : taux de transfert des donnÃ©es: 2500,5000,10,100,1000 Mbit/s. Positionnement: Plafond, Mur, Couleur du produit: Blanc. Type d'antenne: Interne. Largeur: 220 mm, Profondeur: 220 mm, Hauteur: 62,5 mm

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Aerial
Antenna:	Internal

Expansion / Connectivity
Interfaces:	1 x 1/2.5/5GBase-T - RJ-45 ¦ 1 x 1000Base-T (auxiliary) - RJ-45 ¦ 1 x management - RJ-45

General
Depth:	22 cm
Device Type:	Radio access point
Height:	6.25 cm
Ruggedized Design:	Indoor
Width:	22 cm

Networking
Capacity:	Spatial streams: 3
Compliant Standards:	IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Connectivity Technology:	Wireless
Data Link Protocol:	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Data Transfer Rate:	5.2 Gbps
Features:	Auto-sensing per device, DFS support, CleanAir technology, Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), 4T4R MIMO technology, cyclic shift diversity (CSD), MU-MIMO technology, beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Optimized AP Roaming, Cross AP Noise Reduction, ClientLink 4.0 technology, High Density Experience (HDX)
Form Factor:	External
Frequency Band:	2.4 GHz, 5 GHz
Status Indicators:	Boot State, error, status