Cisco - DS-C9148D-4G16P-K9 - MDS 9148 gemanaged 1U Schwarz

  • 10127182-003
N.º artículo: 10127182-003
Bajo pedido

Tiempo de entrega aprox. 5 días

N.º artículo: 10127182-014
Bajo pedido

Tiempo de entrega aprox. 5 días

Envíeme una notificación cuando el artículo esté disponible para su entrega.

  • 3 años de garantía
  • Envío el mismo día via UPS
  • Encargado de cuenta personal
  • Soporte y montaje técnico

Descripción del producto

Cisco - DS-C9148D-4G16P-K9 - MDS 9148 gemanaged 1U Schwarz
más
Dimensions & Weight
Depth: 48 cm
Height: 4.5 cm
Weight: 10 kg
Width: 43.6 cm
Environmental Parameters
Humidity Range Operating: 10 - 90% (non-condensing)
Humidity Range Storage: 5 - 95% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Interfaces: 1 x 1000Base-T RJ-45 management ¦ 1 x console RJ-45 management ¦ 16 x 4Gb Fibre Channel (SW) - LC x 2
General
Authentication Method: RADIUS, TACACS+, Secure Shell v.2 (SSH2), DH-CHAP
Device Type: Switch - 16 ports - Managed
Enclosure Type: Desktop, rack-mountable 1U
Encryption Algorithm: AES
Features: Hot swap module replacement, auto-sensing per device, DHCP support, trunking, ISL support, Syslog support, manageable, LUN zoning, Access Control List (ACL) support, Quality of Service (QoS), back to front airflow
Fibre Channel: FC-AL, FC-AL-2, FC-BB, FC-DA, FC-FLA, FC-FS, FC-GS, FC-GS-3, FC-GS-4, FC-IP, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-SB-2, FC-SB-3, FC-SW-2, FC-SW-3, FC-Tape, FC-VI, FC-SP, FCP-4, FC-BB-2, FCP, FCP-2, FC-PI-2, FC-BB-3, FC-FS-2, FC-GS-5, FC-SW-4, FCP-3, FC-LS, FC-MI-2, FC-PI-4, FC-FS-3, FC-GS-6, FC-PI-3, FC-SW-5
Max Transfer Distance: 860 m
Performance: Bandwidth: 768 Gbps
Ports: 16 x 4Gb Fibre Channel
Remote Management Protocol: RMON, SNMP 3, SSH-2, CLI
Status Indicators: Port status, power, status
Subtype: Fibre Channel
Miscellaneous
Compliant Standards: NEBS level 3, ETSI, CISPR 22 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, ICES-003 Class A, FCC CFR47 Part 15, FCC CFR21 Part 1040, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825, FCC Part 15 A, NEBS, CSA C22.2 No. 60950-1
Localisation: Europe
Power
Installed Qty: 2 (installed) / 2 (max)
Power Consumption Operational: 300 Watt
Power Device: Internal power supply - hot-plug
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Drivers & Utilities, Cisco MDS 9000 NX-OS 5.0, Cisco Data Center Network Manager (DCNM) for SAN Essentials Edition
Últimos vistos