Cisco - C9500-40X-A - Catalyst 9500 40-port 10Gig switch, Network Advantage

Cisco - C9500-40X-A - Catalyst 9500 40-port 10Gig switch, Network Advantage
  • 10237797-003
N.º artículo: 10237797-003
12.549,50 €
Precios incl. IVA legal más gastos de envío
Precio neto:10.545,80 €
Disponible: 3

Tramitación inmediata del pedido, plazo de entrega aprox. 1-5 días laborables.

N.º artículo: 10237797-014
0,00 €
Precios incl. IVA legal más gastos de envío
Precio neto:0,00 €
Disponible: 1

Tramitación inmediata del pedido, plazo de entrega aprox. 1-5 días laborables.

¿Dudas sobre el artículo?
  • 3 años de garantía
  • Envío el mismo día via UPS
  • Encargado de cuenta personal
  • Soporte y montaje técnico

Descripción del producto

Catalyst 9500 40-port 10Gig switch, Network Advantage
más
Dimensions & Weight
Depth: 54.7 cm
Height: 4.39 cm
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 5 - 90% (non-condensing)
Humidity Range Storage: 5 - 95% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 65 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -20 °C
Expansion / Connectivity
Interfaces: 40 x 10GBase-X SFP+ ¦ 2 x USB 3.0
General
Built-in Devices: RFID tag
Capacity: Routing table entries: 64000 ¦ Indirect IPv4 routes: 64000 ¦ Host IPv4 routes: 32000 ¦ Indirect IPv6 routes: 32000 ¦ Host IPv6 routes: 16000 ¦ Multicast scale: 48000 ¦ QoS ACL scale: 18000 ¦ Security ACL scale: 18000 ¦ FNF entries: 512000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae
Device Type: Switch - 40 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Encryption Algorithm: 256-bit AES
Features: DHCP support, NAT support, PAT support, IGMP snooping, Syslog support, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Non-Stop Routing (NSR), LLDP support, Remote Switch Port Analyzer (RSPAN), NetFlow, Virtual Routing and Forwarding (VRF), Flexible NetFlow (FNF), MACsec support, built-in ASIC, Control plane protection (CoPP), Virtual Extensible LAN (VXLAN), Location ID Separation Protocol (LISP), Application Visibility and Control (AVC), Open Shortest Path First (OSPF), TrustSec support, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Layer 3 VPN (L3VPN) support, Zero-touch provisioning (ZTP), CoAP support, Switched Port Analyzer (SPAN), Cisco StackWise Virtual, Encapsulated Remote SPAN (ERSPAN), Security Group Tag (SGT) caching, Security Group Access Control List (SGACL), IT Service Management (ITSM) integration, third-party IP Address Management (IPAM) integration
Flash Memory: 16 GB
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 64K entries
Performance: Switching capacity (full duplex): 480 Gbps ¦ Forwarding rate: 720 Mpps
Ports: 40 x 10 Gigabit SFP+
Power Over Ethernet (PoE): UPOE
Processor: 1: 2.4 GHz
RAM: 16 GB - DIMM 288-pin - DDR4 SDRAM
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF
Routing Protocol: OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS
Subtype: 10 Gigabit Ethernet
Miscellaneous
Compliant Standards: Plug and Play, CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A, CNS 13438 Class A, EN 300 386, KN 61000-4, CAN/CSA-C22.2 No. 60950-1
MTBF: 180,640 hours
Power
Features: Front-to-rear air?ow
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Provided: 950 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V (50 - 60 Hz)
Últimos vistos