Cisco - WS-C3850-32XS-E - Catalyst 3850-32XS-E - Switch - L3

Cisco - WS-C3850-32XS-E - Catalyst 3850-32XS-E - Switch - L3
  • 10125711-014
N.º artículo: 10125711-003
Bajo pedido

Tiempo de entrega aprox. 5 días

N.º artículo: 10125711-014
Bajo pedido

Tiempo de entrega aprox. 5 días

Envíeme una notificación cuando el artículo esté disponible para su entrega.

  • 3 años de garantía
  • Envío el mismo día via UPS
  • Encargado de cuenta personal
  • Soporte y montaje técnico

Descripción del producto

Cisco - WS-C3850-32XS-E - Catalyst 3850-32XS-E - Switch - L3
más

Información del producto

Dimensions & Weight
Depth: 45 cm
Height: 4.45 cm
Weight: 6.1 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 95% (non-condensing)
Max Operating Temperature: 45 °C
Max Storage Temperature: 70 °C
Min Operating Temperature: -5 °C
Min Storage Temperature: -40 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 0 (free) x Expansion Slot
Interfaces: 24 x 10GBase-X SFP+ ¦ 6 x 10GBase-X SFP+ uplink ¦ 1 x USB Type A ¦ 1 x management (mini-USB) Type B ¦ 1 x console RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 2 x network stack device
General
Authentication Method: Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity: IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Virtual interfaces (VLANs): 4000 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards: IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type: Switch - 32 ports - L3 - Managed - stackable
Enclosure Type: Desktop, rack-mountable 1U
Features: DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP)
Flash Memory: 4 GB
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 32000 entries
Performance: Switching capacity: 640 Gbps ¦ Stacking bandwidth: 480 Gbps
Ports: 24 x 1 Gigabit / 10 Gigabit SFP+ + 6 x 10 Gigabit SFP+ (uplink)
RAM: 4 GB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Routing Protocol: BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, IGMP, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MLDv2, MLD
Status Indicators: Port transmission speed, port duplex mode, power, system, active, status
Subtype: 10 Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1
MTBF: 307.99 hours
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply
Power Provided: 715 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1 (with optional power supply)
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS IP Services
Últimos vistos