Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Para poder utilizar tonitrus.com en toda su extensión, le recomendamos activar Javascript en su navegador.

¡Descubra nuestros servicios de mantenimiento y opciones de financiación TI!

Vista previa: Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Vista previa: Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Vista previa: Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

N.º artículo: 10105633-014

¿Dudas sobre el artículo?

3 años de garantía
Envío el mismo día via UPS
Encargado de cuenta personal
Soporte y montaje técnico

Descripción del producto

Cisco - WS-C3560X-48P-S - Catalyst 3560X 48 Port PoE IP Base

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Información del producto

Dimensions & Weight
Depth:	46 cm
Height:	4.5 cm
Weight:	7.4 kg
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	5 - 95% (non-condensing)
Max Storage Temperature:	70 °C
Min Operating Temperature:	-5 °C
Min Storage Temperature:	-40 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x Expansion Slot
Interfaces:	48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX - RJ-45 management

General
Authentication Method:	Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:	Virtual interfaces (VLANs): 1005
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at
Device Type:	Switch - 48 ports - Managed
Enclosure Type:	Rack-mountable 1U
Features:	Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)
Flash Memory:	128 MB Flash
Jumbo Frame Support:	9216 bytes
Performance:	Switching fabric bandwidth: 160 Gbps
Ports:	48 x 10/100/1000 (PoE)
Power Over Ethernet (PoE):	PoE
RAM:	256 MB
Remote Management Protocol:	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, static IP routing, RIPng
Status Indicators:	Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype:	Gigabit Ethernet

Miscellaneous
Compliant Standards:	TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1
MTBF:	149,594 hours
Rack Mounting Kit:	Optional

Power
Features:	Redundant Power System (RPS) connector
Installed Qty:	1 (installed) / 2 (max)
Power Device:	Internal power supply
Power Redundancy:	Optional
Power Redundancy Scheme:	1+1 (with optional power supply)
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
Software Included:	Cisco IOS IP Base

Últimos vistos