Cisco - WS-C2960X-48LPD-L - Catalyst 2960-X 48 GigE PoE 370W, 2 x 10G SFP+ LAN Base

Cisco - WS-C2960X-48LPD-L - Catalyst 2960-X 48 GigE PoE 370W, 2 x 10G SFP+ LAN Base

N.º artículo: 10108539-014

¿Dudas sobre el artículo?

3 años de garantía
Envío el mismo día via UPS
Encargado de cuenta personal
Soporte y montaje técnico

Cerrar menú

Descripción del producto

Cisco - WS-C2960X-48LPD-L - Catalyst 2960-X 48 GigE PoE 370W, 2 x 10G SFP+ LAN Base

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Información del producto

Dimensions & Weight
Depth:	36.8 cm
Height:	4.5 cm
Weight:	5.8 kg
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 95% (non-condensing)
Humidity Range Storage:	10 - 95% (non-condensing)
Max Operating Temperature:	45 °C
Max Storage Temperature:	70 °C
Min Operating Temperature:	-5 °C
Min Storage Temperature:	-25 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x Stacking Module
Interfaces:	48 x 1000Base-T RJ-45 12 ports (PoE+) / 24 ports (PoE) ¦ 1 x console RJ-45 ¦ 1 x mini-USB Type B management ¦ 1 x USB Type A ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x SFP+ uplink

General
Authentication Method:	Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:	Active VLANs: 1023
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Device Type:	Switch - 48 ports - Managed - stackable
Enclosure Type:	Desktop, rack-mountable 1U
Features:	Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Management Information Base (MIB), Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS), Cisco FlexStack Plus, DiffServ Code Point (DSCP) support
Flash Memory:	128 MB
Jumbo Frame Support:	9216 bytes
Max Units In A Stack:	8
Performance:	Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 130.9 Mpps
PoE Budget:	370 W
Ports:	48 x 10/100/1000 (PoE+) + 2 x SFP+
Power Over Ethernet (PoE):	PoE+
Processor:	: 600 MHz
RAM:	512 MB
Remote Management Protocol:	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI
Status Indicators:	Port transmission speed, port duplex mode, system, status, RPS (Redundant Power Supply), PoE, link/activity
Subtype:	Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, RoHS 2011/65/EU, EN 300386
MTBF:	277,960 hours

Power
Features:	Redundant Power System (RPS) connector
Power Consumption Operational:	45.7 Watt
Power Device:	Internal power supply
Power Redundancy:	Optional
Voltage Required:	AC 120/230 V (50/60 Hz)