Cisco - WS-C2960XR-24PS-I - Catalyst 2960-XR 24 GigE PoE 370W, 4 x 1G SFP, IP Lite

Cisco - WS-C2960XR-24PS-I - Catalyst 2960-XR 24 GigE PoE 370W, 4 x 1G SFP, IP Lite

N.º artículo: 10108432-014

¿Dudas sobre el artículo?

3 años de garantía
Envío el mismo día via UPS
Encargado de cuenta personal
Soporte y montaje técnico

Cerrar menú

Descripción del producto

Cisco - WS-C2960XR-24PS-I - Catalyst 2960-XR 24 GigE PoE 370W, 4 x 1G SFP, IP Lite

Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html

Información del producto

Dimensions & Weight
Depth:	40.8 cm
Height:	4.45 cm
Weight:	6.2 kg
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 95% (non-condensing)
M:
Max Operating Temperature:	45 °C
Min Operating Temperature:	-5 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x Stacking Module
Interfaces:	24 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 12 ports (PoE+) / 24 ports (PoE) - 30 W ¦ 1 x console console - RJ-45 - RJ-45 ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 2 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 4 x SFP (mini-GBIC) - SFP uplink

General
Authentication Method:	Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:	Virtual interfaces (VLANs): 1023
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Device Type:	Switch - 24 ports - L3 - Managed - stackable
Enclosure Type:	Desktop, rack-mountable 1U
Features:	Layer 2 switching, power over Ethernet (PoE), auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS), Cisco FlexStack Plus
Flash Memory:	128 MB
Jumbo Frame Support:	9216 bytes
Max Units In A Stack:	8
Performance:	Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 71.4 Mpps
PoE Budget:	370 W
Ports:	24 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE):	PoE+
Processor:	: 600 MHz
RAM:	512 MB
Remote Management Protocol:	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Routing Protocol:	OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
Status Indicators:	Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity
Subtype:	Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386
MTBF:	321,290 hours

Power
Features:	Redundant Power System (RPS) connector
Installed Qty:	1 (installed) / 2 (max)
Power Device:	Internal power supply
Power Provided:	640 Watt
Power Redundancy:	Optional
Power Redundancy Scheme:	1+1 (with optional power supply)
Voltage Required:	AC 120/230 V (50/60 Hz)