Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding over POTS - Router - 1.000 Mbps - 8-Port

Para poder utilizar tonitrus.com en toda su extensión, le recomendamos activar Javascript en su navegador.

¡Descubra nuestros servicios de mantenimiento y opciones de financiación TI!

Vista previa: Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

Vista previa: Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

Vista previa: Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding ov

N.º artículo: 10126583-014

Envíeme una notificación cuando el artículo esté disponible para su entrega.

3 años de garantía
Envío el mismo día via UPS
Encargado de cuenta personal
Soporte y montaje técnico

Descripción del producto

Cisco - C897VAB-K9 - 897VA Gigabit Ethernet Security Router with SFP and VDSL2/ADSL2+ Bonding over POTS - Router - 1.000 Mbps - 8-Port

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
Type:	DSL modem

Dimensions & Weight
Depth:	24.8 cm
Height:	4.4 cm
Width:	32.3 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	LAN: 8 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ WAN: 1 x SFP (mini-GBIC) ¦ WAN: 1 x VDSL / ADSL2+ ¦ Management: 1 x console - RJ-45 ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x 1000Base-T - RJ-45

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 50
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, IEEE 802.1x, IEEE 802.3ah, IEEE 802.1ag, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN 61000-6-1, AES, FCC CFR47 Part 15, VCCI V-3
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet, Gigabit Ethernet
Device Type:	Router - 8-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	Triple DES, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DiffServ support, MAC address filtering, IPv6 support, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), RADIUS support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD), DHCP relay, DHCP client, Virtual Routing and Forwarding (VRF), Class of Service (CoS)
Flash Memory:	256 MB (installed) / 256 MB (max)
Network / Transport Protocol:	L2TP, RSVP, ICMP/IP, IPSec, FTP, DHCP, DNS, L2TPv3
RAM:	512 MB (installed) / 1 GB (max)
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, OSPFv3, policy-based routing (PBR), BGP-4+, WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators:	Port status, power, PoE

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced IP services

Últimos vistos