Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Para poder utilizar tonitrus.com en toda su extensión, le recomendamos activar Javascript en su navegador.

¡Descubra nuestros servicios de mantenimiento y opciones de financiación TI!

Vista previa: Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Vista previa: Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Vista previa: Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Vista previa: Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

N.º artículo: 10110451-003

¿Dudas sobre el artículo?

3 años de garantía
Envío el mismo día via UPS
Encargado de cuenta personal
Soporte y montaje técnico

Descripción del producto

Cisco - C891FW-E-K9 - Cisco 890 Series Integrated Services Routers

Communications
Protocols & Specifications:	ITU V.92
Type:	ISDN / analogue modem combo

Dimensions & Weight
Depth:	24.84 cm
Height:	4.45 cm
Width:	32.28 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	LAN: 8 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ WAN: 1 x SFP (mini-GBIC) ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ Management: 1 x RJ-45 ¦ USB 2.0: 1 x 4 pin USB Type A ¦ 1 x modem ¦ 1 x BRI

General
Authentication Method:	RADIUS, TACACS+
Capacity:	Connection / user qty: 50
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3ah, IEEE 802.1ag, ETSI, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:	Wireless, wired
Data Link Protocol:	Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n
Device Type:	Wireless router - 8-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	NAT support, power over Ethernet (PoE), VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, CleanAir technology, Bidirectional Forwarding Detection (BFD), fanless, Virtual Routing and Forwarding (VRF), Class of Service (CoS)
Flash Memory:	256 MB (installed) / 256 MB (max)
Frequency Band:	2.4 GHz / 5 GHz
Network / Transport Protocol:	L2TP, RSVP, IPSec, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:	1 GB (installed) / 1 GB (max)
Remote Management Protocol:	Telnet, SNMP 3, HTTP, SSH, CLI
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators:	Port status, power

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced IP services

Últimos vistos