Cisco - CISCO892F-K9 - Cisco 892 GigaE SecRouter with SFP

  • 10106524-014
N.º artículo: 10106524-003
Bajo pedido

Tiempo de entrega aprox. 5 días

N.º artículo: 10106524-014
321,50 €
Precios incl. IVA legal más gastos de envío
Precio neto:270,17 €
Disponible: 1

Tramitación inmediata del pedido, plazo de entrega aprox. 1-5 días laborables.

¿Dudas sobre el artículo?
  • 3 años de garantía
  • Envío el mismo día via UPS
  • Encargado de cuenta personal
  • Soporte y montaje técnico

Descripción del producto

Cisco - CISCO892F-K9 - Cisco 892 GigaE SecRouter with SFP
más
Communications
Type: ISDN terminal adapter
Dimensions & Weight
Depth: 24.9 cm
Height: 4.4 cm
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x SO-DIMM 200-pin ¦ 1 (total) / 1 (free) x SFP (mini-GBIC)
Interfaces: LAN: 8 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x auxiliary - RJ-45 ¦ USB 2.0: 2 x 4 pin USB Type A ¦ WAN: 1 x BRI ST
General
Authentication Method: RADIUS, TACACS+
Capacity: IPSec VPN tunnels: 50
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology: Wired
Data Link Protocol: Ethernet, Fast Ethernet
Device Type: Router - 8-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: LEAP, Triple DES, AES, PEAP, TKIP
Features: VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory: 256 MB (installed) / 256 MB (max)
Network / Transport Protocol: L2TP, IPSec
RAM: 512 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE
Status Indicators: Port status, power
Power
Power Device: External power adapter - 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Últimos vistos