Cisco - CISCO886VA-K9 - Cisco 886 VDSL/ADSL over ISDN Multi-mode Router

  • 10105374-003
N.º artículo: 10105374-003
Bajo pedido

Tiempo de entrega aprox. 5 días

N.º artículo: 10105374-014
Bajo pedido

Hora de entrega 4 Días hábiles

Envíeme una notificación cuando el artículo esté disponible para su entrega.

  • 3 años de garantía
  • Envío el mismo día via UPS
  • Encargado de cuenta personal
  • Soporte y montaje técnico

Descripción del producto

Cisco - CISCO886VA-K9 - Cisco 886 VDSL/ADSL over ISDN Multi-mode Router
más
Communications
Digital Signaling Protocol: ADSL2+ over ISDN, VDSL2 over ISDN
Protocols & Specifications: ITU G.991.2 (G.shdsl), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5, ITU G.992.1 (G.DMT) Annex A, ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M
Type: ISDN / DSL modem combo
Dimensions & Weight
Depth: 26.4 cm
Height: 4.4 cm
Weight: 2.5 kg
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 - 85% (non-condensing)
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: LAN: 2 x 10Base-T/100Base-TX - RJ-45 ¦ LAN: 2 x 10Base-T/100Base-TX (PoE) - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST ¦ Management: 1 x console - RJ-45
General
Authentication Method: RADIUS, TACACS+, Extensible Authentication Protocol (EAP)
Capacity: Concurrent IPSec tunnels: 20 ¦ Maximum number of configured SSIDs: 16 ¦ Wireless VLANs: 8
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, ANSI T1.413, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), CISPR 24, EN55022, CISPR 22, EN50082-1, EN55022 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, IPv6 Ready, EN 61000-3-2:2000, EN 61000-3.3:1995 + A1:2001, KN22, EN55024:1998 + A1 + A2, EN 50082-1:1997, EN 300386
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type: Router - 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: LEAP, DES, Triple DES, SSL, PEAP, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP
Features: Firewall protection, NAT support, MDI/MDI-X switch, power over Ethernet (PoE), VLAN support, content filtering, DiffServ support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), MIMO technology, Virtual Route Redundancy Protocol (VRRP) support, WLAN controller mode, Asynchronous Transfer Mode (ATM), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, DNS proxy, wireless bridge mode, Bidirectional Forwarding Detection (BFD), DHCP relay, Port Security, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Ingress Layer 2 MAC Access Control Lists (ACLs), VPN Server, Call Admission Control (CAC), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support
Flash Memory: 256 MB
Frequency Band: 2.4 GHz
Network / Transport Protocol: L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, RTP
RAM: 256 MB
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators: Port status
Line Properties
Framing Format: ANSI T1.413
Miscellaneous
Pricing Type: Refurbished
Power
Power Device: External power adapter - 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced IP services
Últimos vistos