Cisco - CISCO881-SEC-K9 - Cisco 881 Ethernet Sec Router w/ Adv IP Services

Descripción del producto

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX - RJ-45 ¦ USB: 1 x 4 pin USB Type A

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Device Type:	Router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	NAT support, interrupt status port (ISP), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, MAC address filtering, IPv6 support, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
Flash Memory:	128 MB
Network / Transport Protocol:	L2TP, IPSec
RAM:	256 MB (installed) / 768 MB (max) DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE
Status Indicators:	Port status, power