Cisco - C9500-32C-A - Catalyst 9500 32-port 100G only, Advantage

Cisco - C9500-32C-A - Catalyst 9500 32-port 100G only, Advantage
  • 10237785-003
Order number: 10237785-003
on request

Delivery time approx. 5 working days

Order number: 10237785-014
on request

Delivery time approx. 5 working days

Please inform me as soon as the product is available again.

  • 3 year warranty
  • Same day shipments via UPS
  • personal account manager
  • technical support and configurations

Product Description

Catalyst 9500 32-port 100G only, Advantage
more
Dimensions & Weight
Depth: 53.9 cm
Height: 4.39 cm
Weight: 11.63 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 5 - 90% (non-condensing)
Humidity Range Storage: 5 - 95% (non-condensing)
Max Operating Temperature: 40 °C
Max Storage Temperature: 65 °C
Min Operating Temperature: 0 °C
Min Storage Temperature: -20 °C
Expansion / Connectivity
Interfaces: 32 x 100Gbit LAN QSFP28 ¦ 2 x USB 3.0
General
Built-in Devices: RFID tag
Capacity: Routing table entries: 80000 ¦ Indirect IPv4 routes: 212000 ¦ Host IPv4 routes: 90000 ¦ Indirect IPv6 routes: 212000 ¦ Host IPv6 routes: 90000 ¦ Multicast scale: 32000 ¦ QoS ACL scale: 16000 ¦ Security ACL scale: 270000 ¦ FNF entries: 96000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 4000
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba
Device Type: Switch - 32 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Encryption Algorithm: 256-bit AES
Features: DHCP support, NAT support, PAT support, trunking, MPLS support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Flexible NetFlow (FNF), Multicast Source Discovery Protocol (MSDP), MACsec support, Control plane protection (CoPP), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, CoAP support, Switched Port Analyzer (SPAN)
Flash Memory: 16 GB
Jumbo Frame Support: 9198 bytes
MAC Address Table Size: 64K entries
Performance: Switching capacity (full duplex): 6.4 Tbps ¦ Forwarding rate: 2 Bpps
Ports: 32 x 100 Gigabit QSFP28
Processor: 1: 2.4 GHz
RAM: 16 GB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, SNMP 2c, TFTP, NETCONF, RESTCONF
Routing Protocol: OSPF, IS-IS, RIP-2, BGP, EIGRP, IGMP, VRRP, PIM-SM, PIM-SSM, MSDP, RIPng, MPLS
Subtype: 100 Gigabit Ethernet
Miscellaneous
Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, TVCN 7317, VCCI V-3/2009 Class A, CAN/CSA-C22.2 No. 60950-1
MTBF: 212,820 hours
Power
Installed Qty: 1 (installed) / 2 (max)
Power Device: Internal power supply - hot-plug
Power Provided: 1600 Watt
Power Redundancy: Optional
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V (50 - 60 Hz)
Software / System Requirements
Software Included: Cisco IOS XE 16.8.1
Viewed