Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
Cisco - ATA191-K9 - Cisco ATA 191 - VoIP-Telefonadapter - 100Mb LAN
- Ordrenummer: 10230882-003
Oplys mig venligst så snart produktet er tilgængeligt igen.
- 3 Jahre Garantie
- schneller Versand
- persönlicher Kundenberater
- Konfiguration Ihrer Hardware
Produktbeschreibung
Cisco ATA 191 - VoIP-Telefonadapter - 100Mb LAN
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 - 90% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 1 x 100Base-TX - RJ-45 ¦ 2 x FXS - RJ-11 |
General | |
---|---|
Depth: | 2.8 cm |
Device Type: | VoIP phone adapter |
Height: | 10 cm |
Weight: | 132.1 g |
Width: | 10 cm |
IP Telephony | |
---|---|
IP Telephony Features: | Echo cancellation, comfort noise generation (CNG), voice activity detection (VAD), call forwarding, Caller ID, adaptative jitter buffer, call waiting, call hold, call transfer, silence suppression |
Telephony Interfaces: | 2 phone (FXS) |
VoIP Protocols: | SIP, RTCP, RTP, SRTP |
Voice Codecs: | G.711, G.729a, G.729ab, G.711u, G.711a, T.38 |
Miscellaneous | |
---|---|
Compliant Standards: | FCC Part 15 B, EN 61000-4-2:2009, EN 61000-4-11:2004, EN 61000-3-3:2013, EN 61000-4-3:2006+A1:2008+A2:2010, EN 61000-4-8:2010, EN 61000-4-5:2014, EN 55024:2010+A1:2015, Directive 2014/35/EU, Directive 2014/30/EU, EN 61000-4.4:2012, UL 60950 Second Edition, CAN/CSA C22.2 No. 60950 Second Edition, ANSI C63.4-2014, AS/NZS 60950-1:2015, EN 61000-3-2:2014 Class A, EN 55032:2015 Class B, AS/NZS CISPR32:2015 Class B, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013 |
MTBF: | 300,000 hours |
Networking | |
---|---|
Compliant Standards: | IEEE 802.1Q, IEEE 802.1p, IEEE 802.1ab (LLDP) |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet |
Encryption Algorithm: | AES |
Features: | Syslog support, DiffServ support, IPv6 support, full duplex mode, SNTP support, Quality of Service (QoS), reset button, LLDP support, DHCP client, Type of Service (ToS), Internet Control Message Protocol (ICMP), dual image support, AES encryption, Cisco Discovery Protocol, secure boot, VLAN Tagging |
Form Factor: | Wall mountable |
Network / Transport Protocol: | ARP, DHCP, RTP, RTCP |
Remote Management Protocol: | HTTP, HTTPS, TFTP, SSH |
Status Indicators: | Power, phone |
Power | |
---|---|
Power Consumption Operational: | 5 Watt |
Power Device: | External power adapter |
Voltage Required: | AC 120/230 V / DC 5 V |
Set