Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
- Ordrenummer: 10116649-014
- 3 Jahre Garantie
- schneller Versand
- persönlicher Kundenberater
- Konfiguration Ihrer Hardware
Produktbeschreibung
JUNIPER EX4200 48P 10/100/1000 POE 930W PSU
Product information
Dimensions & Weight | |
---|---|
Depth: | 41.7 cm |
Height: | 4.3 cm |
Weight: | 8.3 kg |
Width: | 44.2 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 - 85% |
Max Operating Temperature: | 45 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
Interfaces: | 1 x management ¦ 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 PoE ¦ 1 x network stack device |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP) |
Built-in Devices: | Status LCD |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
Device Type: | Switch - 48 ports - L3 - Managed - stackable |
Enclosure Type: | Desktop 1U |
Encryption Algorithm: | MD5, TLS, PEAP, TTLS |
Features: | Hot swap module replacement, routing, Layer 3 switching, Layer 2 switching, DHCP support, power over Ethernet (PoE), ARP support, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DoS attack prevention, store and forward, IPv6 support, High Availability, 256-bit encryption, DHCP snooping, Quality of Service (QoS), RADIUS support, Jumbo Frames support, DHCP server, DHCP proxy, Dynamic ARP Inspection (DAI), temperature sensor, Redundant trunk group (RTG), Time Domain Reflectometry (TDR), Virtual Chassis technology, Non-Stop Bridging (NSB), Non-Stop Routing (NSR), Graceful Route Engine Switchover (GRES) |
Flash Memory: | 1 GB Flash |
MAC Address Table Size: | 24K entries |
Max Units In A Stack: | 10 |
Ports: | 48 x 10/100/1000 (PoE) |
Power Over Ethernet (PoE): | PoE |
Processor: | PowerPC: 1 GHz |
RAM: | 1 GB |
Remote Management Protocol: | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, RMON, SNMP 3, HTTP, HTTPS, SSH-2 |
Routing Protocol: | OSPF, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, policy-based routing (PBR) |
Status Indicators: | LCD display |
Subtype: | Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | TUV GS, CISPR 22 Class A, cUL, VCCI Class A ITE, EN55024, EN55022 Class A, CSA 22.2 No. 60950, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, EN 300 386 |
TAA Compliant: | Yes |
Power | |
---|---|
Installed Qty: | 1 (installed) / 2 (max) |
Power Consumption Operational: | 930 Watt |
Power Device: | Internal power supply - hot-plug |
Power Redundancy: | Yes |
Voltage Required: | AC 120/230 V |
Software / System Requirements | |
---|---|
Software Included: | Juniper NetScreen-Security Manager |
Set