Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base
- Ordrenummer: 10108762-003
- 3 Jahre Garantie
- schneller Versand
- persönlicher Kundenberater
- Konfiguration Ihrer Hardware
Produktbeschreibung
Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base
Dimensions & Weight | |
---|---|
Depth: | 33.2 cm |
Height: | 4.4 cm |
Weight: | 5.4 kg |
Width: | 45 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 - 95% (non-condensing) |
Humidity Range Storage: | 10 - 95% (non-condensing) |
Max Operating Temperature: | 40 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | -5 °C |
Min Storage Temperature: | -25 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 24 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 2 x SFP ¦ 2 x 1000Base-T RJ-45 |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | Active VLANs: 64 |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
Device Type: | Switch - 24 ports - Managed |
Enclosure Type: | Rack-mountable 1U |
Features: | Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
Flash Memory: | 64 MB |
Jumbo Frame Support: | 9018 bytes |
Performance: | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps |
PoE Budget: | 370 W |
Ports: | 24 x 10/100 (PoE) + 2 x combo Gigabit SFP |
Power Over Ethernet (PoE): | PoE |
RAM: | 128 MB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP |
Status Indicators: | Port status, port transmission speed, port duplex mode, power, system, link/activity |
Subtype: | Fast Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386 |
Rack Mounting Kit: | Optional |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco LAN Base software |
Set