Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
- Ordrenummer: 10108740-003
Oplys mig venligst så snart produktet er tilgængeligt igen.
- 3 Jahre Garantie
- schneller Versand
- persönlicher Kundenberater
- Konfiguration Ihrer Hardware
Produktbeschreibung
Cisco 886VA Annex J router with VDSL2/ADSL2+ over ISDN
Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html
Herstellerinformationen:
Cisco Systems GmbH
Parkring 20
85748 Garching Deutschland
0800 - 187 36 52
+49 (0)89 51657 1001
https://www.cisco.com/c/m/de_de/impressum.html
Communications | |
---|---|
Digital Signaling Protocol: | ADSL2+ over ISDN, VDSL2 over ISDN |
Protocols & Specifications: | ITU G.992.1 (G.DMT), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5 |
Type: | ISDN / DSL modem combo |
Dimensions & Weight | |
---|---|
Depth: | 24.9 cm |
Height: | 4.4 cm |
Weight: | 2.5 kg |
Width: | 32.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 - 85% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
Interfaces: | LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | IPSec VPN tunnels: 20 |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 50082-2, FCC CFR47 Part 15, EN 300 386 |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet |
Device Type: | Router - 4-port switch (integrated) |
Enclosure Type: | Desktop |
Encryption Algorithm: | DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), dynamic DNS server, MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
Flash Memory: | 128 MB |
Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
RAM: | 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin |
Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
Status Indicators: | Port status, power |
Line Properties | |
---|---|
Framing Format: | ANSI T1.413 |
Power | |
---|---|
Power Device: | External power adapter - 60 Watt |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
OS Provided: | Cisco IOS Advanced Security |
Set