Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant new and refurbished buy online low prices

For at benytte tonitrus.com korekt, anbefaler vi du aktiverer Javascript i din browser.

Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Preview: Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Preview: Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Preview: Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Preview: Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Cisco - C887VAM-W-E-K9 - Cisco 887VA Annex M router with 802.11n ETSI Compliant

Ordrenummer: 10106272-003

Har du spørgsmål angående dette produkt?

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Produktbeschreibung

Cisco 887VA Annex M router with 802.11n ETSI Compliant

Aerial
Aerial:	External detachable
Antenna Qty:	3
Directivity:	Omni-directional
Gain Level:	2 dBi

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.5 Annex M, ITU G.993.2, ITU G.992.3 Annex M
Type:	DSL modem

Dimensions & Weight
Depth:	26.4 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

General
Authentication Method:	RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wireless, wired
Data Link Protocol:	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:	Wireless router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:	128 MB
Frequency Band:	2.4 GHz
Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators:	Port status, power

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security

Set