LinkedIn
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware
Cookie-Einstellungen
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
PayPal-Zahlungen
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
Cisco - CISCO887W-GN-E-K9 - Cisco 887 ADSL2/2+ Annex A Router 802.11n ETSI Comp
- Ordrenummer: 10105179-014
-
3 Jahre Garantie -
schneller Versand
-
persönlicher Kundenberater
-
Konfiguration Ihrer Hardware
Produktbeschreibung
Cisco 887 ADSL2/2+ Annex A Router 802.11n ETSI Comp
| Aerial | |
|---|---|
| Aerial: | External detachable |
| Antenna Qty: | 3 |
| Directivity: | Omni-directional |
| Gain Level: | 2 dBi |
| Communications | |
|---|---|
| Digital Signaling Protocol: | ADSL2+ |
| Protocols & Specifications: | ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.992.5 Annex A |
| Type: | ISDN / DSL modem combo |
| Dimensions & Weight | |
|---|---|
| Depth: | 26.4 cm |
| Height: | 4.4 cm |
| Weight: | 2.5 kg |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 - 85% |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| Connectivity Technology: | Wireless, wired |
| Data Link Protocol: | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Device Type: | Wireless router - 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 128 MB |
| Frequency Band: | 2.4 GHz |
| Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA |
| RAM: | 256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE |
| Status Indicators: | Port status, power |
| Power | |
|---|---|
| Power Device: | External power adapter - 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Security |
Set