HP - J9800A - HP 1810-8 Switch new and refurbished buy online low prices

Ordrenummer: 10108379-003

Oplys mig venligst så snart produktet er tilgængeligt igen.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Luk menu

Produktbeschreibung

HP 1810-8 Switch

Herstellerinformationen:
Hewlett-Packard GmbH
Herrenberger Straße 140
71034 Böblingen Deutschland
+49 69 153253561
+49 7031 9858500
enterprise.kunden@hpe.com
https://www.hpe.com/de/de/about/impressum.html

Dimensions & Weight
Depth:	11.81 cm
Height:	4.39 cm
Weight:	350 g
Width:	20.14 cm

Environmental Parameters
Humidity Range Operating:	15 - 95% (non-condensing)
Humidity Range Storage:	15 - 90% (non-condensing)
Max Operating Temperature:	40 °C
Max Storage Temperature:	70 °C
Min Operating Temperature:	0 °C
Min Storage Temperature:	-40 °C

Expansion / Connectivity
Interfaces:	7 x 100Base-TX RJ-45 ¦ 1 x 1000Base-T RJ-45

General
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1ab (LLDP), IEEE 802.3az
Device Type:	Switch - 8 ports - Managed
Enclosure Type:	Desktop, wall-mountable 1U
Encryption Algorithm:	SSL
Features:	Flow control, full duplex capability, Layer 2 switching, DHCP support, BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), DoS attack prevention, port mirroring, SNTP support, Rapid Spanning Tree Protocol (RSTP) support, Quality of Service (QoS), Jumbo Frames support, LLDP support, Energy Efficient Ethernet
Flash Memory:	8 MB
Jumbo Frame Support:	9220 bytes
MAC Address Table Size:	8K entries
Performance:	Throughput: up to 2.5 Mpps ¦ Switching capacity: 3.4 Gbps
Ports:	7 x 10/100 + 1 x 10/100/1000
RAM:	128 MB
Remote Management Protocol:	SNMP 1, SNMP 2c, HTTP, HTTPS
Subtype:	Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, EN 60950, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 60950, EN55022 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1, WEEE, VCCI V-3, VCCI V-4

Power
Voltage Required:	AC 120/230 V (50/60 Hz)