Dell - S4810P-AC - Force10 S4810 High-Performance - Switch - L3 - Managed - 48 x SFP+ + 4 x QSFP+ - back to front airflow

Dell - S4810P-AC - Force10 S4810 High-Performance - Switch - L3 - Managed - 48 x SFP+ + 4 x QSFP+ - back to front airflow - desktop

Ordrenummer: 10175519-003

Oplys mig venligst så snart produktet er tilgængeligt igen.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Luk menu

Produktbeschreibung

Force10 S4810 High-Performance - Switch - L3 - Managed - 48 x SFP+ + 4 x QSFP+ - back to front airflow - desktop

Herstellerinformationen:
Dell GmbH
Unterschweinstiege 10
Main Airport Center
60549 Frankfurt am Main Deutschland
069 - 9792 7350
DE.CustomerSupport@dell.com
https://www.dell.com/de-de/lp/legal/legal-notices

Dimensions & Weight
Depth:	46 cm
Height:	4.4 cm
Weight:	6.5 kg
Width:	44 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	48 x SFP+ ¦ 4 x QSFP+ ¦ 1 x serial (RS-232) RJ-45 management

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPv4 routes: 16000 ¦ Virtual interfaces (VLANs): 4096 ¦ ACL: 2000
Compliant Standards:	IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3ba
Device Type:	Switch - 48 ports - L3 - Managed - stackable
Enclosure Type:	Desktop 1U
Encryption Algorithm:	MD5
Features:	DHCP support, BOOTP support, ARP support, IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, RADIUS support, Jumbo Frames support, back to front airflow, Per-VLAN Spanning Tree Plus (PVST+), IPv4 support
Jumbo Frame Support:	9000 bytes
MAC Address Table Size:	128K entries
Performance:	Switching capacity: 1.28 Tbps
Ports:	48 x SFP+ + 4 x QSFP+
Remote Management Protocol:	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, FTP, TFTP
Routing Protocol:	OSPF, BGP-4, RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2, IGMPv3
Status Indicators:	Power, system, fan
Subtype:	10 Gigabit Ethernet

Miscellaneous
Compliant Standards:	CISPR 22 Class A, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, RoHS, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, FDA, FCC CFR47 Part 15 B, EN 60825-1
MTBF:	169,315 hours
Rack Mounting Kit:	Included

Power
Installed Qty:	1 (installed) / 2 (max)
Power Consumption Operational:	230 Watt
Power Device:	Internal power supply - hot-plug
Power Redundancy:	Optional
Voltage Required:	AC 120/230 V (50/60 Hz)