JUNIPER - M7IBASE-AC-1GE - Juniper M-series M7i - Modulare Erweiterungseinheit neu und gebraucht günstig online kaufen

Artikel-Nr.: 10208629-014

Benachrichtigen Sie mich, sobald der Artikel lieferbar ist.

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Produktbeschreibung

Juniper M-series M7i - Modulare Erweiterungseinheit

Herstellerinformationen:
Juniper Networks GmbH
Oskar-Schlemmer-Str. 15
80807 München Deutschland
+49-89203012192
https://info @ juniper.net

Dimensions & Weight
Depth:	45.7 cm
Height:	8.9 cm
Width:	44.5 cm

Environmental Parameters
Humidity Range Operating:	5 - 90%
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x PC Card ¦ 4 (total) / 4 (free) x expansion slot
Installed Modules Qty (Max):	0 (installed) / 4 (max)
Interfaces:	1 x Ethernet 1000 ¦ Management: 2 x RS-232 - 9 pin D-Sub (DB-9) ¦ Management: 1 x 10Base-T/100Base-TX - RJ-45 ¦ 1 x SFP (mini-GBIC)

General
Authentication Method:	RADIUS
Compliant Standards:	IEEE 802.1Q, BSMI, VCCI Class B ITE, EN 60950, EN 61000-3-2, IEC 825-1/EN 60825-1 class 1, UL 60950, EN55022 Class B, AS/NZ 3548 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CSA C22.2 No. 60950-00, EN 61000-4-5, EN 61000-4-11
Connectivity Technology:	Wired
Data Link Protocol:	Gigabit Ethernet
Device Type:	Modular expansion base
Enclosure Type:	Desktop - modular
Encryption Algorithm:	DES, Triple DES, MD5, SHA-1
Features:	Modular design, firewall protection, hot swap module replacement, 56-bit encryption, 168-bit encryption, Layer 3 switching, Layer 2 switching, DHCP support, NAT support, VPN support, MPLS support, VLAN support, Syslog support, traffic shaping, DoS attack prevention, packet filtering, DiffServ support, IPv6 support, High Availability, firmware upgradable, DDos attack prevention
Network / Transport Protocol:	TCP/IP, IPSec, PPPoA
Remote Management Protocol:	SNMP 2, SNMP 3, HTTP
Routing Protocol:	OSPF, IS-IS, RIP-2, BGP, DVMRP, PIM-SM, static IP routing, PIM-DM, IGMPv3, PIM-SSM
Status Indicators:	Link OK, fail, alarm, link/activity

Power
Installed Qty:	1 (installed) / 2 (max)
Power Device:	Internal power supply - hot-plug
Power Redundancy:	Yes
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	JUNOS