Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - WS-C3560V2-48PS-S - Catalyst 3560V2 48 10/100 PoE + 4 SFP + IPB (Standard) Image

  • 10104180-003
Artikel-Nr.: 10104180-003
auf Anfrage

Lieferzeit ca. 5 Tage

Artikel-Nr.: 10104180-014
auf Anfrage

Lieferzeit 1 Werktage

Benachrichtigen Sie mich, sobald der Artikel lieferbar ist.

  • 3 Jahre Garantie
  • schneller Versand
  • persönlicher Kundenberater
  • Konfiguration Ihrer Hardware

Produktbeschreibung

Catalyst 3560V2 48 10/100 PoE + 4 SFP + IPB (Standard) Image
mehr
Dimensions & Weight
Depth: 29.5 cm
Height: 4.4 cm
Weight: 5 kg
Width: 44.3 cm
Environmental Parameters
Humidity Range Operating: 10 - 85%
Max Operating Temperature: 45 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: 24 x 100Base-TX RJ-45 PoE ¦ 24 x 100Base-TX RJ-45 ¦ 1 x console RJ-45 management ¦ 4 x SFP (mini-GBIC)
General
Authentication Method: Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type: Switch - 48 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Features: Layer 3 switching, auto-sensing per device, DHCP support, auto-negotiation, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), MAC address filtering, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
Flash Memory: 32 MB Flash
MAC Address Table Size: 12K entries
Ports: 48 x 10/100 + 4 x SFP
Power Over Ethernet (PoE): PoE
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c
Routing Protocol: RIP-1, RIP-2, static IP routing
Status Indicators: Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), link/activity
Subtype: Fast Ethernet
Miscellaneous
Compliant Standards: GOST, CISPR 24, NOM, EN55024, EN55022 Class A, CISPR 22, EMC, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A
MTBF: 206,041 hours
Power
Features: Redundant Power System (RPS) connector
Power Device: Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS IP Base
Zuletzt angesehen