Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Cisco - WS-C3560E-48TD-SD - Catalyst 3560E 48 10/100/1000 + 2*10GE(X2),265W DC, IPB s/w

  • 10104279-003
Artikel-Nr.: 10104279-003
auf Anfrage

Lieferzeit ca. 5 Tage

Artikel-Nr.: 10104279-014
auf Anfrage

Lieferzeit ca. 5 Tage

Benachrichtigen Sie mich, sobald der Artikel lieferbar ist.

  • 3 Jahre Garantie
  • schneller Versand
  • persönlicher Kundenberater
  • Konfiguration Ihrer Hardware

Produktbeschreibung

Catalyst 3560E 48 10/100/1000 + 2*10GE(X2),265W DC, IPB s/w
mehr

Produktinformationen

Dimensions & Weight
Depth: 46 cm
Height: 4.5 cm
Weight: 8.6 kg
Width: 44.5 cm
Environmental Parameters
Humidity Range Operating: 0 - 95%
Max Operating Temperature: 45 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: 48 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x X2
General
Authentication Method: Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type: Switch - 48 ports - L3 - Managed
Enclosure Type: Rack-mountable 1U
Features: Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
Flash Memory: 64 MB Flash
MAC Address Table Size: 12K entries
Ports: 48 x 10/100/1000 + 2 x X2
RAM: 128 MB
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2
Routing Protocol: RIP-1, RIP-2, static IP routing, RIPng
Status Indicators: Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity
Subtype: Gigabit Ethernet
Miscellaneous
Compliant Standards: FCC Class A certified, TUV GS, CISPR 22 Class A, BSMI CNS 13438 Class A, cUL, NOM, VCCI Class A ITE, EN55024, EN55022 Class A, UL 60950 Third Edition, EN50082-1, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, EN 300 386
MTBF: 166,907 hours
Power
Features: Redundant Power System (RPS) connector
Power Consumption Operational: 151 Watt
Power Device: Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Cisco IOS IP Base
Zuletzt angesehen