Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base neu und gebraucht günstig online kaufen

Um Tonitrus.com - Ihr IT Online Shop für neue und generalüberholte IT Produkte in vollem Umfang nutzen zu können, empfehlen wir Ihnen Javascript in Ihrem Browser zu aktiveren.

Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Vorschau: Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Vorschau: Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Vorschau: Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Cisco - WS-C2960+24PC-L - Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Artikel-Nr.: 10108762-014

Jetzt Angebot / Verfügbarkeit anfragen !

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Menü schließen

Produktbeschreibung

Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

Dimensions & Weight
Depth:	33.2 cm
Height:	4.4 cm
Weight:	5.4 kg
Width:	45 cm

Environmental Parameters
Humidity Range Operating:	10 - 95% (non-condensing)
Humidity Range Storage:	10 - 95% (non-condensing)
Max Operating Temperature:	40 °C
Max Storage Temperature:	70 °C
Min Operating Temperature:	-5 °C
Min Storage Temperature:	-25 °C

Expansion / Connectivity
Interfaces:	24 x 100Base-TX RJ-45 PoE - 15.4 W ¦ 2 x SFP ¦ 2 x 1000Base-T RJ-45

General
Authentication Method:	RADIUS, TACACS+
Capacity:	Active VLANs: 64
Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Device Type:	Switch - 24 ports - Managed
Enclosure Type:	Rack-mountable 1U
Features:	Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Flash Memory:	64 MB
Jumbo Frame Support:	9018 bytes
Performance:	Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps
PoE Budget:	370 W
Ports:	24 x 10/100 (PoE) + 2 x combo Gigabit SFP
Power Over Ethernet (PoE):	PoE
RAM:	128 MB
Remote Management Protocol:	SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
Status Indicators:	Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype:	Fast Ethernet

Miscellaneous
Compliant Standards:	FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386
Rack Mounting Kit:	Optional

Power
Features:	Redundant Power System (RPS) connector
Power Device:	Internal power supply
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
Software Included:	Cisco LAN Base software

Zuletzt angesehen