Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp neu und gebraucht günstig online kaufen

Um Tonitrus.com - Ihr IT Online Shop für neue und generalüberholte IT Produkte in vollem Umfang nutzen zu können, empfehlen wir Ihnen Javascript in Ihrem Browser zu aktiveren.

Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Vorschau: Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

Vorschau: Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

Cisco - CISCO886W-GN-E-K9 - Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

Artikel-Nr.: 10112338-014

Jetzt Angebot / Verfügbarkeit anfragen !

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Menü schließen

Produktbeschreibung

Cisco 886 ADSL2/2+ Annex B Router w/ 802.11n ETSI Comp

Aerial
Aerial:	External detachable
Antenna Qty:	3
Directivity:	Omni-directional
Gain Level:	2 dBi

Communications
Digital Signaling Protocol:	ADSL over ISDN, ADSL2+ over ISDN
Protocols & Specifications:	ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex B
Type:	ISDN / DSL modem combo

Dimensions & Weight
Depth:	26.4 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST

General
Authentication Method:	RADIUS, TACACS+
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.1ag, IEEE 802.11n (draft 2.0), CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, FCC CFR47 Part 15 B, VCCI V-3, EN 300 386
Connectivity Technology:	Wireless, wired
Data Link Protocol:	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:	Wireless router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Flash Memory:	128 MB
Frequency Band:	2.4 GHz
Network / Transport Protocol:	L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:	256 MB (installed) / 768 MB (max)
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:	OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP
Status Indicators:	Port status, power

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security

Zuletzt angesehen