Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp neu und gebraucht günstig online kaufen

Um Tonitrus.com - Ihr IT Online Shop für neue und generalüberholte IT Produkte in vollem Umfang nutzen zu können, empfehlen wir Ihnen Javascript in Ihrem Browser zu aktiveren.

Sie haben Interesse an Service- und Wartungsverträgen oder günstigen Leasingangeboten? Wir beraten Sie gerne!

Vorschau: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Vorschau: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Vorschau: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Vorschau: Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Cisco - C887VA-W-E-K9 - Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Artikel-Nr.: 10106273-014

Jetzt Angebot / Verfügbarkeit anfragen !

3 Jahre Garantie
schneller Versand
persönlicher Kundenberater
Konfiguration Ihrer Hardware

Menü schließen

Produktbeschreibung

Cisco 887VA VDSL2/ADSL2+ over POTS W/802.11n ETSI Comp

Communications
Digital Signaling Protocol:	ADSL2, ADSL2+, VDSL2
Protocols & Specifications:	ITU G.994.1 (G.hs), ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
Type:	DSL modem

Dimensions & Weight
Depth:	26.4 cm
Height:	4.4 cm
Weight:	2.5 kg
Width:	32.5 cm

Environmental Parameters
Humidity Range Operating:	10 - 85% (non-condensing)
Max Operating Temperature:	40 °C
Min Operating Temperature:	0 °C

Expansion / Connectivity
Expansion Slots:	1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2

General
Authentication Method:	RADIUS, Radio Service Set ID (SSID), TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Capacity:	IPSec VPN tunnels: 20
Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:	Wired
Data Link Protocol:	Ethernet, Fast Ethernet
Device Type:	Router - 4-port switch (integrated)
Enclosure Type:	Desktop
Encryption Algorithm:	LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:	Firewall protection, DHCP support, NAT support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:	128 MB
Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS
RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators:	Port status, power

Line Properties
Framing Format:	ANSI T1.413

Power
Power Device:	External power adapter - 60 Watt
Voltage Required:	AC 120/230 V (50/60 Hz)

Software / System Requirements
OS Provided:	Cisco IOS Advanced Security

Zuletzt angesehen